Felt oil seals suitable for the Crankshaft main seal on Ruston Hornsby PB & PT engines.
Seal inner diameter = 1, 1/4"
Seal thickness = 1/4"
A top quality head gasket available in either copper / non asbestos or Klinger SLS graphite material for either the Wolseley WD or Ruston 1,1/2 Hp PB and PT engines.
A top quality, hand made exhaust silencer for wolseley stationary engines using a 1" BSP threaded fitting. Made to the original Wolseley exhaust specification for authenticity they don't come much better than this.
An NGK B4H spark plug suitable for use in water cooled Wolseley WD1 and WD2 stationary engines with a 14mm plug thread.
An NGK spark plug suitable for use in Wolseley WD8 stationary engines with a 14mm plug thread and a 19mm reach.
High resistance insulation cable manufactured with a Hypalon matt black finish to the outer insulation material and a suppressed graphite inner core making this an ideal authentic looking replacement.
Also used on the following engines:- Lister A, B, J, K, L, and N type engines.
David Edgington has been researching Wolseley history, and the full range of engines, for around 30 years. This book, around 60 pages with over 100 illustrations, is the culmination of that research and has been painstakingly put together during the last 10 months.
A pair of reproduction water slide transfer of the famous Wolseley signiture. Ideal to add the finishing touches to any Wolseley engine restoration project.
A pair of quality reproduction valve springs for the Wolseley WD1 and 2 type engines.
A range of quality reproduction valve springs for the Ruston Hornsby ZPR type engines.
A pair of quality reproduction valve springs for the Ruston Hornsby PT 1.5HP type engines.
A pair of quality reproduction valve springs for the Ruston Hornsby PB 9 type engines.
Categories
