Big end bearing shells for Lister JP engines on 0.040" under size.
Equivalent to Lister Petter P/N 010-04039/040
Big end bearing shells for Lister JP engines on 0.020" under size.
Equivalent to Lister Petter P/N 010-04039/020
Big end bearing shells for Lister JP engines on 0.010" under size.
Equivalent to Lister Petter P/N 010-04039/010
Big end bearing shells for Lister JP engines on standard size.
Equivalent to Lister Petter P/N 010-04039
Petter PAZ1 governor weight spring.
Petter P/N 327036 or PD6
This part is now obsolete from Lister Petter.
Petter PAZ1 fuel pump rack extension spring.
Equivalent to Petter part numbers ZPN141 and 259875
This part is now obsolete from Lister Petter.
Suitable for both air and water cooled WD and WLB engines on both the flywheel and starting handle sides.
Please note these are sold individually, if you need two seals please adjust the order quantity accordingly.
Lister water pump carbon seal assembly, as used on some of the Lister FR, JP, JW, HRW and HW models water pumps.
These do not fit all Lister water pumps, if you need assistance please contact us before purchasing.
A Wolseley WD and WLB brass water drain tap and adapter union.
A quality brass water drain tap supplied with a suitable brass union to convert to a female 1/2" BSP socket. This will screw onto the end of the water drain pipe which is available separately.
Equivalent to Wolseley P/N WD317
A Wolseley WD and WLB HT lead wire support.
Equivalent to Wolseley part number WD101.
Lister D carburettor air valve plate screws and spring washer set as used on Lister D carburettors to secure the small brass plate to the underside of the air intake casting.
This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.
A faithful reproduction of the Lister L cylinder head valve guide.
Carefully manufactured from top quality materials to be an exact copy of the originals.
A length of new Simplex Magneto drive chain suitable for use on the Magneto drive of Lister A, B and Junior stationary engines.
A good quality, solid exhaust flange for the Lister A type of engine. It has a female 1,1/4" BSP thread to receive the exhaust pipe and the centre to centre distance of the mounting holes is 2.368 inches.
Lister A exhaust flange for the 2.5hp, 3hp and 3.5hp Junior engines. A good quality cast iron replica, this exhaust flange has a 1.25" BSP female thread to accept the exhaust pipe directly or an elbow. Equipped with two stud holes with 2.375” centres.
The flange is approximately 1” or 25mm thick.
Note: These are not suitable for the early single flywheel versions of these engines. They will also not fit the larger 4-5hp B type engines, which require a larger flange.
Lister A exhaust manifold gasket
Die cut from high temperature asbestos free gasket material.
British made Lister D carburetor air valve adjuster lock nut.
Equivalent to Lister part number S583.
Sold individually.
Manufactured from quality brass.
A faithful reproduction of the Lister L cylinder head valve.
Carefully manufactured from top quality materials to be an exact copy of the originals.
Replacement Lister D carburetor air valves.
Equivelent to Lister part number D109 or 004-00109
A pair of nickel plated solid brass screws for securing the carburettor air strainer cover on Wolseley WD engines.
Can also be used for the same cover of WD9 and WLB9 paraffin vaporizer models.
Equivalent to Wolseley part number WD92.
British made Lister D carburetor air valve adjuster.
Equivelent to Lister part number A189.
Sold individually.
Manufactured from quality brass.
Good quality reproduction starting handles for use on standard rotation Lister D and DK engines.
These handles turn / crank clockwise and have a hand grip that spins on the handle shaft for comfort and ease of use.
Equivalent to Lister part number D178C.
These handles are either plated or painted depending on stock availability.
Lister D magneto fixing bolt and washer set. This set comprises of three 3/8" BSW bolts / set screws equivalent to Lister part number S739 and three flat washers equivalent to Lister part number S184