A die cut exhaust manifold gasket.
Cut from high temperature asbestos free WCL FSF gasket material.
Total length = 5 3/8"
Total width = 3 1/4"
Centre hole diameter = 2 3/8"
Stud hole diameter = 9/16"
Centre to centre distance of the stud holes = 4 1/4"
Thickness 1/16" Approx.
Lister A exhaust manifold gasket
Die cut from high temperature asbestos free gasket material.
A quality replacement fuel / oil pump ball valve suitable for Lister J to R type engines.
Sold singularly.
Lister domestic water pump stud, for securing the top cover plate to the main body casting.
These studs are threaded with 3/8" BSW on both ends and are 1, 1/8" overall length.
Lister P/N 187-00325
British made Lister D carburetor air valve adjuster lock nut.
Equivalent to Lister part number S583.
Sold individually.
Manufactured from quality brass.
A faithful reproduction of the Lister L and J cylinder base gasket.
Carefully hand made from top quality materials to be an exact copy of the originals.
Lister domestic 187 type water pump stud, for securing the bearing carrier to the main body casting.
These studs are threaded with 5/16" BSW on both ends and are 3, 3/16" overall length as per the original specification
Plated to help prevent corrosion.
Equivalent to Lister P/N 187-00368
Lister D inlet & exhaust manifold gasket pair.
Die cut from high temperature asbestos free gasket material.
Lucas SR1 and SR2 magneto points cover / end cover gasket. Die cut from high quality genuine Flexoid gasket paper.
Lucas P/N 458194
Good quality British made fuel pump springs equivalent to Lister part number 002-00452 or A452
For all later style Lister A, AK, B & BK pumps with an external spring and dust cap. Will not fit the early pumps that have internal springs.
These are good quality, made from superior spring steel and finished to a high standard in the UK.
A single reproduction water slide transfer of the famous Fowler engine logo in yellow, grey and black as the the original design. Ideal to add the finishing touches to any Fowler engine restoration project.
Lister D magneto fixing bolt and washer set. This set comprises of three 3/8" BSW bolts / set screws equivalent to Lister part number S739 and three flat washers equivalent to Lister part number S184
Lister DK Petrol/Parrafin vaporiser gasket. Die cut from high temperature stainless steel foil reinforced graphite gasket material.
Clockwise and anti-clockwise rotation arrow sets available in either 4' or 6" sizes.
Intended for Lister or Petter engines but could be used on any make if you wish.
Felt oil seal material available in sheet form or from the roll.
Lister D carburettor air valve plate screws and spring washer set as used on Lister D carburettors to secure the small brass plate to the underside of the air intake casting.
This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.
A Petter 1.5 to 4 HP air valve.
The air valve must lie flat on the face of the valve plate and the four air ports behind the valve must be covered.
A single reproduction water slide transfer of the famous Crossley engine logo. Ideal to add the finishing touches to any Crossley engine restoration project.
A quality reprint of the instructions for fixing, starting, working and cleaning of Blackstone type W oil engines, covers both fixed and portable models.
Lister 5" fuel tank water slide transfer decal.
Lister fuel tank transfer dimensions are approximately 12cm x 6cm.
Instruction book and spare parts list for the well known Lister H range of pumps.
A quality water slide transfer of the Fairbanks Morse wax seal.
A quality water slide transfer of the Fairbanks Morse Z.