The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Transmissions - Pulleys & Belts :: Vee & Wedge Belts

Vee & Wedge Belts

When calculating the required length of belts please remember the following points:-
 
1, Metric belt length measurments refer to the pitch length which is the circumference of the mid section of the belt.
 
2, Imperial belt length measurments refer to the internal circumference of the belt. Outer circumference lengths are generally not used when sizing belts.
 
3, When working with Imperial belt size designations, A section belts will always have an outer circumference length of 2" longer than the specified inner circumference size and B section belts will always have an outer circumference length of 2.5" longer than the specified inner circumference size.
 
If you have an old belt to replace, see if you can find a length reference in either metric or imperial on the existing belt and use this to order a replacement belt of the correct section and length.

Products

V Belts, Z Profile (9.7x8)
 
(0 reviews)  

Z section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example Z19 is 19" long.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 9.7mm top width x 8mm deep
£3.13
including VAT £0.52

V Belts, A Profile (12.7x10)
 
(0 reviews)  

A section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example A20 is 20" long.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 12.7mm top width x 10mm deep
£3.05
including VAT £0.51

V Belts, B Profile (16.3x13)
 
(0 reviews)  

B section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example B26 is 26" long.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 16.3mm top width x 13mm deep
£4.85
including VAT £0.81

V Belts, C Profile (22x18)
 
(0 reviews)  

C section V belts are the classic wrapped V-belt, temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment. Supplied in standard imperial lengths as specified by the part number, for example C40 is 40" long.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 22mm top width x 18mm deep
£9.82
including VAT £1.64