The correct size replacement V belts for Lister CS 6-1 & 8-1 Start-O-Matic generator sets.
These are a good quality heavy duty B profile / section belts which when ordered in multiples of two come as matched sets.
Sold individually.
DC brushes for use on 2.5KW K series alternators, these are commonly found fitted to Lister CS Start-O-Matic sets.
Suitable for machines up to serial number 29518K.
These brushes measure 7/8" x 5/8" x 1,1/2" long.
AC brushes for use on 2.5KW, K series alternators and BKB S.A.E & C.T.R 609 Series alternators of both single and three phase output configurations either 50/60Hz.
These brushes measure 20mm x 8mm x 20mm and are made from CM5H grade carbon.
Brushes for use on Lister Petter alternators.
These brushes measure 7/8" x 1/2" x 1,1/2" and are made from CM6 grade carbon.
Lister Petter brushes part number 064-07279
These brushes measure 5/8" x 5/16" x 1" and are made from CM6 grade carbon.
DC brushes for use on 2.5KW K series alternators, these are commonly found fitted to Lister CS Start-O-Matic sets.
Suitable for machines after serial number 29518K.
These brushes measure 1" x 1/2" x 1,1/4" long
AC brushes for use on SCAF / SCTF 320 series alternators.
Lister Petter part number 064-82181/001 alternative part number 1168270/02 and 064-82180/001
These brushes measure 16mm wide x 8mm thick x 20mm long and are made from CM5H grade carbon.
AC brushes for use on SCAF, SCTF, SDAF and SDTF 320 series alternators.
Lister Petter part number 064-82181/002 alternative part number 1155193/03
These brushes measure 25mm wide x 10mm thick x 32mm long and are made from CM5H grade carbon.
Lister SR1 AC brushes for use on Start-O-Matic series alternators.
Lister Petter part number 064-82180/003
These brushes are 6.4mm x 8mm and measure 16mm long.
Lister AC brushes for use on RS2 and RS3 series alternators commonly fittred to the Lister HR range of engines.
Lister Petter part number 064-82180/004
These brushes are 10mm x 25mm and measure 32mm long.
DC brushes for use on Lister SCAF / SCTF 320 series alternators.
These brushes measure 7/8" wide x 3/8" thick x 1,1/6" long and are made from CM6 grade carbon.
Lister Petter part number 064-82181/001 Alternative number 1168270/02
DC brushes for use on Lister SCAF / SCTF 225 series alternators.
These brushes measure 7/8" wide x 5/16" thick x 1,1/8" long and are made from CM6 grade carbon.
Lister Petter part number 064-82181/002 Alternative number 1173014/01
DC brushes for use on Lister SCTF 117 series alternators.
These brushes measure 16mm wide x 12.5mm thick x 30mm long and are made from CM6 grade carbon.
Lister Petter part number 064-82181/003 Alternative number 1194914/01
Lister SR1 DC brushes for use on Start-O-Matic series alternators.
Lister Petter part number 064-82181/005
These brushes are 5/8" x 5/8" x 1,1/16" long.
DC brushes for use on Lister alternators.
These brushes measure 3/4" wide x 1/2" thick x 1,3/8" long and are made from CM5H or GM41 grade carbon.
Lister Petter part number 064-82180/008 Alternative number 1136600/01
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
