The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Workshop Consumables :: Sheet Gasket Materials

Sheet Gasket Materials

Products

12mm PTFE Tape
 
(0 reviews)  

Excellent quality PTFE thread sealing tape for ensuring any threaded joint does not leak.

Standard 12mm roll width by approx 12m long.

£0.71
including VAT £0.12
Qty
Graphlex Graphite Material
 
(0 reviews)  

Pure exfoliated graphite with a stainless steel foil reinforcement for improved handling characteristics.

The excellent conform-ability of graphite means that the material is suitable for applications where bolt load is limited or flanges are damaged.

Key Features:

  • Excellent resistance to steam.
  • Resistance to virtually all media.
  • Outstanding resistance to high and low temperatures.
  • High compressibility.
  • Good anti leakage properties.
  • Unlimited storage life.
  • Anti-stick finish on both sides.
  • Easy to cut with die tools.
  • Max temperature: +400 ºC.
  • Max pressure: 140 bar.


Supplied in single sheets measuring 295mm by 210mm by 1.5mm thick. Other sizes are available by special order, please contact us with your requirements.

£10.42
including VAT £1.74
Qty
High Temperature Gasket Sheet
 
(0 reviews)  

Compressed heat resistant fibre with NBR rubber binder. Available sizes from stock 0.8 and 1.5 mm in widths of 1.5M. Sold by the 0.5 metre length i.e. for one metre order qty 2 for two metre order qty 4 etc. Also available by special order in 0.5, 2 and 3 mm thickness.

£71.99
including VAT £12.00

Neoprene Rubber Gasket Sheet
 
(0 reviews)  
Good resistance to water, moderate resistance to mineral oils and ozone. This product is not suitable for food use. Temperature range of -20C to 110C and a hardness of 60 shore.
£16.79
including VAT £2.80

Plain Paper Gasket Sheet 0.25mm
 
(0 reviews)  
Suitable for mineral oils, hydrocarbons and cold water not suitable for acids and steam. Maximum temperature 120'C Available in 0.25mm, 0.5mm, 0.8mm and  1mm thick all from 1 metre wide rolls.
£4.33
including VAT £0.72

Plain Paper Gasket Sheet 0.5mm
 
(0 reviews)  
Suitable for mineral oils, hydrocarbons and cold water not suitable for acids and steam. Maximum temperature 120'C Available in 0.25mm, 0.5mm, 0.8mm and 1mm thick all from 1 metre wide rolls.
£5.36
including VAT £0.89

Plain Paper Gasket Sheet 0.8mm
 
(0 reviews)  
Suitable for mineral oils, hydrocarbons and cold water not suitable for acids and steam. Maximum temperature 120'C Available in 0.25mm, 0.5mm, 0.8mm and 1mm thick all from 1 metre wide rolls.
£5.77
including VAT £0.96

WCL Excelsior Gasket Material, 1.5mm Thick
 
(0 reviews)  
High resistance to hot oils, fuels, hydrocarbons and refrigerants. Good steam resistance and excellent creep resistance. This material is asbestos free and has very low gas permeability. Ideal for making stationary engine head gaskets.
 
Standard sheet size is A4 approximately 295mm by 205mm which roughly equates to 11,1/2" by 8" However we cut this size from a large roll, if you require a larger size in one piece simply email us and we will be happy to provide a quotation.
 
Colour: Blue
Max. Short term service temp. 440°C.
Continuous service temp. 250°C Max.
Operation temp. for steam 200°C
Max, service pressure 100 Bar.
£10.75
including VAT £1.79
Qty
WCL Superior Gasket Material, 1mm Thick
 
(0 reviews)  
General purpose, asbestos free gasketing material suitable for use with oils, solvent, gases, water, low pressure steam and most dilute acids and alkali's. Suitable for use in the food industry, public utilities, water treatment plants, chemical plant and all general purpose engineering applications. 
 
A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers.
 
Standard sheet size is A4 approximately 295mm by 205mm which roughly equates to 11,1/2" by 8" However we cut this size from a large roll, if you require a larger size in one piece simply email us and we will be happy to provide a quotation.
£6.30
including VAT £1.05
Qty