This section allows you to order any shade of premium quality coach enamel from the RAL colour chart below. The coach enamel is supplied in a variety of tin sizes and is mixed to your specific requirements. Simply select the shade you require from the chart below, type the colour number into the blank box, choose the finish required as well as the tin size and proceed to the checkout page to complete your order.
A traditional ultra high quality synthetic coach / machinery enamel with high build properties a long wet edge and high solids content for both brush and spray application. Gives an extra long wet edge time allowing the largest of vehicles or fabrications to be brushed or sprayed without overspray or brush drag. Provides ultimate high gloss with build and scratch filling properties combined with excellent water resistance, flexibility and good exterior durability and toughness.
Is used in preference to normal commercially available enamels for decorative work of the highest standard. The quality of the finish allows for longer maintenance intervals to subsequent re-finishing. Ideal for heavy duty vehicle finishing, tractors, stationary engines, marine applications as well as for vehicle repair work. It has a very good resistance to oils, fats, and cutting oils / fluids etc, which makes it an ideal choice for all types of workshop machinery.
Touch dry:- 2 Hours.
Firm dry:- 6 Hours.
Hard dry:- 12 Hours.
Thinners:- Preferably fully synthetic BT8 or white spirits.
Over coating:- Within 30 minutes or after 16 hours.
Film thickness:- 100 microns WFT gives approximately 50 microns DFT.
VOC:- 420g/l
Solids:- Approximately 43 to 55% dependent on colour.
Flashpoint:- Above 32șC
Specific Gravity:- 0.90 to 1.12 approximately dependent on colour.
Viscosity:- 1.5 - 3.2 poise ICI Cone And Plate.
Temp Resistance:- 180șC
Storage:- 12 months in original sealed containers.
The colours depicted on the following chart are for
guidance only. The displayed colour will depend on your monitor and browser settings. The finished colour, therefore, may
not be exactly as shown here.
Suitable thinners are available here.