Injector:-
Part No.1 - BKB80S550
Part No.2 - 5441061
BMC fuel pump fibre drive coupling disc.
For use between the fuel pump drive dog / coupler halves.
Equivalent to CAV P/N 7021-6 Or SIMMS P/N 82071
Bosch Mico 032 and 034 series fuel pump control rod / rack.
Similar to CAV P/N 7009-19 and can be used on BPF1B series pumps but please note the rack only has a fixture at one end. You will not be able to mount an overload pawl when using this rack.
FAOAB080C0295
Bryce bleed screw suitable for use on FAOAB and FAOAN fuel pumps used on many Lister Petter single and multi cylinder engines including the Petter PH and PJ series engines.
Fits the following pumps and more:
Lister LD, LR, SL, SR, ST, HR
Petter PH1, PH2, PJ1, PJ2, PJ3, PJ4
Bryce P/N 1-126
Fits the following pumps:
FAOAB080C0210
FAOAB080C0215
FAOAB080C0700
FAOAB080C0705
FAOAB080C0770
FAOAB080C0280
FAOAB080C0295
Bryce FAOAR and FAOBR series fuel pump plunger spring.
Bryce P/N 11-120
A reconditioned Petter AA1, AB1, AB1W, AC1 series 1, AC1W, AC1Z & AC1ZS fuel pump.
Petter P/N AAN1, 299723, 299783, 299870, 372040 or 375060
Lucas pump TPF1R055K6002 or Bryce pump FAOAR055E0613 which supersedes / replaces pump numbers FAOAR055B0486, FAOAR055B0301 and A1DA55/8S301
For engines up to 3000rpm.
A reconditioned Petter AC1 series 1 and AC1W fuel pump.
Petter P/N ACN1, AAN1 or 299783 which has been superseded by P/N 372040.
Bryce Pump FAOAR055E0614 which supersedes / replaces pump numbers FAOAR055B0487, FAOAR055B0488, FAOAR055B0402, FAOAR055B0404, A1DA55/8S404, A1DA55/8S404A, A1DA55/8S307 and A1DA55/8S307A
For fixed speed engines up to 3600 rpm and (early) variable speed engines.
A reconditioned Petter A series fuel pump.
Petter P/N ACN1 or 299783
Bryce Pump FAOAR055E0615 which supersedes / replaces pump numbers FAOAR055B0523, FAOAR055B0493, FAOAR055X0493 and FAOAR055B0527
For both fixed and variable speed engines.
A reconditioned Lucas / Delphi TPF1R055K6001 Fuel Pump
For Petter AC1 series 2, AC1R & AD1 engines.
Petter P/N ACN1D, 273478, 274892, 372030 and 374350
Supersedes Bryce pumps numbered FAOAR055E0774 and FAOAR055E0786
A reconditioned Petter AC1 series 2 fuel pump.
Petter P/N 247767
Bryce Pump FAOARO55E0851 which supersedes FAOAR055E0840
A reconditioned Petter mini twin, AC2, AC2W and AD2 fuel pump.
Bryce P/N FAOBR055E0786 which supersedes FAOBR055A0567, FAOBR055A0568 and FAOBR055E0617
For engines ranging 1500 to 3600rpm.
These fuel injection pumps are suitable replacements for pumps marked A1CB90/7S60
Bryce, CAV, Lucas or equivalent fuel pump element for CAV and Bryce pumps fitted to Bukh DV20 engines.
Equivalent to P/N 11-109EB and compatible with pump FAOBR070E0632
Please check suitability for your exact pump before purchasing.
A replacement 10mm fuel pump element for use in CAV or Bryce fuel pumps.
Bryce P/N 7010-562U Ident number B1/4
Bosch P/N 9411038323-079
These are used on Bosch 034 fuel pumps fitted to Listeroid 10-1, 12-1, 20-2 and 24-2 engines.
A quality fuel pump element for use on fuel pumps fitted to original Lister CS 3-1 & 3.5-1 and Lister FR1 to FR6 engines using CAV BPF1B-60 or Bryce FBOAB series fuel pumps.
Size:- 6mm LH
Equivalent to PPK1-6Z, 7009-41, B1/6, B1-6, 1418340005, 1418341001, EPPK333P4Z, PPK1-6Z
A replacement 8mm fuel pump element for use in CAV or Bryce fuel pumps.
Bryce P/N 7010-562P Ident number B1/2
Bosch P/N 9411038321-079
These are used in the Bosch 032 fuel pumps fitted to Listeroid 6-1, 8-1, 12-2 and 16-2 engines.
A replacement 9mm fuel pump element for use in CAV or Bryce fuel pumps.
Bryce P/N 7010-562S Ident number B9/6.
CAV BPE series fuel pump tappet assembly.
Part Number 7010-507, 7010-507A or 6MT12 2910998077616.
Tappet roller assembly for CAV BPE2A, BPE3A, BPe4A and BPE6A fuel pumps.
Sold individually.
CAV SPE and BPE type fuel pump bearing.
Suitable for BPE4A, BPE6A, SPE4A and SPE6A fuel pumps as fitted to many engines throughout the 1930's, 40's and 50's.
Equivalent to Part Number NC6-2. Sold individually.
Inside Diameter: 17mm
Outside Diameter: 40mm
Width: 10mm
Gasket and seal kits for the CAV BPE4A type fuel pumps.
Suitable for BPE4A fuel pumps as fitted to many engines throughout the 1930's, 40's and 50's but possibly most commonly found on the Ferguson TEF20 tractor.
Equivalent to Part Number 7135-29D-P
Containing all the necessary O rings, gaskets, washers and seals etc for the rebuild of a CAV BPE4A type pump.
Gasket and seal kits for the CAV BPE4A type fuel pumps.
Suitable for BPE4A fuel pumps as fitted to many engines throughout the 1930's, 40's and 50's.
Equivalent to Part Number 7135-29J
Containing all the necessary O rings, gaskets, washers and seals etc for the rebuild of a CAV BPE4A type pump.
CAV BPF1B series fuel pump control rod / rack.
Equivalent to CAV P/N 7009-19 and used on all BPF1B series pumps.
Due to the lack of availability of these Stationary Engine Parts has had a limited batch produced in order to support the refurbishment of old pumps and keep these pumps in operation.
Genuine Bosch Mico BPF1B series fuel pump delivery valve springs.
Equivalent to CAV P/N 7032-7 and used on all BPF1B series pumps fitted with element sizes ranging from 5mm to 8mm.
Seal kit for CAV LH & RH hydraulic governors fitted to some CAV N, NN, NNL and NNR pumps.
Equivalent to P/N 7135-29H or Spaco 06562
Containing:-
Gasket 7095-182
Seal ring 7095-294
Seal ring 7097-45
Seal ring 7095-137D
Seal ring 7095-192
Oil seal 7095-118
Washer 5339-131
Washer NW5-22W4
Gasket 7095-157
Washer NW5-45W4
Washer NW5-57W4
Seal ring 7095-294
Gasket 7095-481
Washer NW5-30W4
Washer 7095-35
Gasket 7095-156
Gasket 7095-311
Gasket 7095-151
Seal kit for CAV NR4, NL4, NNR4 and NNL4 fuel pumps.
Equivalent to P/N 7135-29R
Containing:-
4 x D/V joints 7097-319
4 x D/V O ring 7097-45
2 x Air vent joints 5339-131
1 x Inspection cover joint 7096-84
2 x Felt filter pads 7097-231
1 x Filter cover gasket 7096-14
1 x Filter support plate gasket 7096-17
1 x Lift pump gasket 7097-19
1 x Base plate gasket 7076-11
2 x End plate gasket 7097-30
2 x Camshaft oil seal 7097-166
1 x Camshaft key NK1-6
1 x Mechanical governor gasket 7023-794
1 x Pneumatic governor gasket 7034-968
CAV Type 7034-19B Fuel Pump Diaphragms.
These diaphragms are a replacement for the older leather type equivalent to CAV Part No: 7034-19B.
CAV Type 7034-19C Fuel Pump Diaphragms.
These diaphragms are a replacement for the older leather type equivalent to CAV Part No: 7034-19C.
CAV Type 7034-19E Fuel Pump Diaphragms.
These diaphragms are a replacement for the older leather type equivalent to CAV Part No: 7034-19E as used on Rootes Commer TS3 two stroke diesel engines fitted with CAV NL type pumps.
CAV 7111-429 Type Shallow Glass Fuel Bowl
Part number 7111/429
Tractor Filter Glass Bowl.
Dimensions (approx): 93 mm diameter at top
40mm overall height external
19mm diameter hole in the base
Coventry Climax type fuel pump fibre drive coupling disc.
For use between the fuel pump drive dog / coupler halves.
Equivalent to CAV P/N 7021-6 Or SIMMS P/N 82071
CAV BKBL97S5002 fuel injector suitable for various David Brown models.
Calibrated to the correct pressure of 175 atmospheres.
CAV BKBL97S5089 DN5251701 fuel injector suitable for various David Brown models.
Calibrated to the correct pressure of 177 atmospheres.