The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Manufacturers :: Power Transmissions

Power Transmissions

Products

Green Textured Round Belting
 
(0 reviews)  
Green textured Polyurethane belting is round in profile and can be joined at any length required by heat seaming the ends together. This green grade is manufactured with a slightly textured surface to aid grip.
 
An excellent solution for situations where stripping down a machine to change a belt is a long an arduous job, save yourself the trouble and simply feed a length of Polyround Polyurethane belting around the pulleys and join in situ.

Available in a range of diameters from the drop down menu and sold in 1 metre increments - if you want three metres please select a qty of three and we will supply as a single length.
£0.96
including VAT £0.16

Imperial Key Steel
 
(0 reviews)  

Key steel also known as Key Bar or Keysteel is available in a range of Imperial sizes from the drop down menu.

Stocked in self colour these common sizes of Keysteel can be cut to size once purchased from our extensive range of standard 12 Inch lengths.

£3.23
including VAT £0.54

Key Steels
 
(0 reviews)  
Replacement key steels for the fixing of your pulley to the shaft of your ST Alternator. Two sizes available depending on the size of your alternator.
£3.60
including VAT £0.60

Metric Key Steel
 
(0 reviews)  

Key steel also known as Key Bar or Keysteel is available in a range of Metric sizes from the drop down menu.

Stocked in self colour these common sizes of Keysteel can be cut to size once purchased from our extensive range of standard 12 Inch, 304mm lengths.

 

£3.55
including VAT £0.59

Orange Smooth Round Belting
 
(0 reviews)  
Orange coloured smooth Polyurethane belting is round in profile and can be joined at any length required by heat seaming the ends together. This orange grade is manufactured with a smooth surface.
 
An excellent solution for situations where stripping down a machine to change a belt is a long an arduous job, save yourself the trouble and simply feed a length of Polyround Polyurethane belting around the pulleys and join in situ.

Available in a range of diameters from the drop down menu and sold in 1 metre increments - if you want three metres please select a qty of three and we will supply as a single length.
£0.96
including VAT £0.16

Red Hollow Polyurethane Round Belting
 
(0 reviews)  
Red hollow Polyurethane round belting which can be joined at any length required with the special joining connector which inserts into the ends of the belt.
 
An excellent solution for situations where stripping down the machine etc to change a belt is a long an arduous job, save yourself the trouble and simply feed a length of red Polyurethane belting around the pulleys and join in situ.
£3.48
including VAT £0.58

Single Groove V Pulleys, A Profile
 
(0 reviews)  

SPA section V pulleys, Suitable for A Section, SPA section, SPAX section & A section Nutlink, V and wedge belts.

SPA single groove V pulleys manufactured from high quality cast iron.

£7.19
including VAT £1.20

V Belts, Z Profile (9.7x8)
 
(0 reviews)  

Z Section V Belts. The classic wrapped V-belt are temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 9.7mm top width x 8mm deep
£3.13
including VAT £0.52

Slide Plate (63-80 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 63-80.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£20.41
including VAT £3.40
Qty
Taper Lock Bushes 1008
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£3.72
including VAT £0.62

Taper Lock Bushes 1108
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£3.84
including VAT £0.64

V Belts, A Profile (12.7x10)
 
(0 reviews)  

A Section V Belts. The classic wrapped V-belt are temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N2215 and BS3790, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 12.7mm top width x 10mm deep
£3.05
including VAT £0.51

Slide Plate (63-100 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 63-100.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£23.75
including VAT £3.96
Qty
Taper Lock Bushes 1210
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£4.62
including VAT £0.77

Taper Lock Bushes 1215
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£4.91
including VAT £0.82

V Belts, B Profile (16.3x13)
 
(0 reviews)  

B Section V Belts. The classic wrapped V-belt are temperature and oil resistant universal drive belts that have antistatic properties with good power transmission capabilities. They are suitable for both industrial machinery and agricultural equipment.

Construction and Features

  • The tensile member consists of a specially treated high strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Conform to 1S04184, D1N7753 and BS37901, they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimension
  • 16.3mm top width x 13mm deep
£4.85
including VAT £0.81

Slide Plate (90-112 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 90-112.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£28.75
including VAT £4.79
Qty
Taper Lock Bushes 1310
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£5.90
including VAT £0.98

Taper Lock Bushes 1610
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£5.64
including VAT £0.94

Taper Lock Bushes 1615
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£6.46
including VAT £1.08

V Belts, C Profile (22x18)
 
(0 reviews)  

C section wrapped wedge belts are temperature and oil resistant universal drive belts with antistatic properties that have a deeper cross section than conventional v-belts, this increase in height ensures excellent grip and greater power ratings. They have a wide range of applications in both industrial machinery and agricultural equipment that may require high belt speeds.

Construction and Features

  • The tensile member consists of a specially treated higher strength polyester cord to transmit tensile forces and withstand shock loads.
  • The fabric jacket provides grip and protection against external agents and resistance to abrasion.
  • The belt compound converts tensile forces on the sidewalls into longitudinal forces in the tensile member.

    Standards
  • Wrapped wedge belts conform to 1S04184, D1N7753 and BS37901 they meet 1S01813 for static conductivity and have an operating temperature range of -30°C - +60°C.

    Dimensions
  • 22mm top width x 18mm deep
£9.82
including VAT £1.64

Slide Plate (90-132 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 90-132.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£33.74
including VAT £5.62
Qty
Taper Lock Bushes 2012
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£6.46
including VAT £1.08

2" Wide 4ply 5.5mm Thick Balata Flat Belting
 
(0 reviews)  
Top quality heavy duty 4 ply (5.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
 
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
 
Sold by the linear metre, orders for multiples will be supplied in a single open length.
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.
£7.98
including VAT £1.33
Qty
Lister CS Start-O-Matic V Belts
 
(0 reviews)  

The correct size replacement V belts for Lister CS 6-1 & 8-1 Start-O-Matic generator sets.

These are a good quality heavy duty B profile / section belts which when ordered in multiples of two come as matched sets.

Sold individually.

£17.94
including VAT £2.99
Qty
No.15 Alligator Style Belt Lacing
 
(1 reviews)  

High quality heavy duty flat belting joiner lacing strips for belts 3.2 to 4mm thick, sold by the length which is approx 235mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.

£7.55
including VAT £1.26
Qty
Slide Plate (90-160 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 90-160.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£37.75
including VAT £6.29
Qty
Taper Lock Bushes 2517
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£8.11
including VAT £1.35

Twin Groove V Pulleys, A Profile
 
(0 reviews)  

SPA section V pulleys, Suitable for A Section, SPA section, SPAX section & A section Nutlink, V and wedge belts.

SPA two groove V pulleys manufactured from high quality cast iron.

£9.02
including VAT £1.50

Slide Plate (160-180 Frame)
 
(0 reviews)  
The fastest and most economical method of securing alternators and motors to machine beds etc. The available sizes are manufactured from galvanised steel and they can accommodate frame sizes 160-180.
 
They have four slotted holes for fastening the base to the foundation. The ideal solution to setting the perfect belt tension on your setup, simply wind the jacking screw to the desired position and belt tension.
£43.75
including VAT £7.29
Qty
Taper Lock Bushes 2525
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£9.43
including VAT £1.57

Taper Lock Bushes 3020
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£13.60
including VAT £2.27

Taper Lock Bushes 3030
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£17.14
including VAT £2.86

Taper Lock Bushes 3525
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£23.10
including VAT £3.85

1" Wide 3ply 4.5mm Thick Balata Flat Belting
 
(0 reviews)  
Top quality heavy duty 3 ply (4.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
 
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
 
Sold by the linear metre, orders for multiples will be supplied in a single open length.
 
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.
£3.79
including VAT £0.63
Qty
3" Wide 4ply 5.5mm Thick Balata Flat Belting
 
(0 reviews)  
Top quality heavy duty 4 ply (5.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
 
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
 
Sold by the linear metre, orders for multiples will be supplied in a single open length.
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.
£11.99
including VAT £2.00
Qty
HRC70-B Coupling Half Body
 
(0 reviews)  

Pilot bore coupling half body.

£8.10
including VAT £1.35
Qty
No.20 Alligator Style Belt Lacing
 
(0 reviews)  
High quality heavy duty flat belting joiner lacing strips for belts 4 to 4.8mm thick, sold by the length which is approx 290mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
£7.74
including VAT £1.29
Qty
Single Groove V Pulleys, B Profile
 
(0 reviews)  

SPB section V pulleys, Suitable for B Section, SPB section, SPBX section & B section Nutlink, V and wedge belts.

SPB single groove V pulleys manufactured from high quality cast iron.

£11.45
including VAT £1.91

Taper Lock Bushes 3535
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£30.61
including VAT £5.10

HRC70-F Coupling Half Body
 
(0 reviews)  
taperlock coupling half body. Taper lock bush fits from the Inside. Bush Type - 1008
£8.10
including VAT £1.35
Qty
Taper Lock Bushes 4040
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£44.35
including VAT £7.39

HRC70-H Coupling Half Body
 
(0 reviews)  
Taperlock coupling half body. Taper lock bush fits from the outside. Bush Type - 1008
£8.10
including VAT £1.35
Qty
Taper Lock Bushes 4545
 
(0 reviews)  

Taper bushes also known as taper lock bushes are a tapered, non-flanged, split bushing that utilises allen head grub screws to tighten or pull them into a reducing taper socket squeezing them onto the shaft they are being mounted upon, thus providing excellent clamping force for securing a vast range of pulleys, sprockets, flanged hubs and couplers.

These bushes are utilised on pulleys and sprockets to increase the clamping force over standard bored-to-size products that only use a keyway and set screw to lock onto the shaft. All the bushes supplied by Stationary Engine Parts are of the highest quality, made from high quality materials and come individually boxed with the grub screws.

 

£72.64
including VAT £12.11

HRC70-T Coupling Insert Element
 
(0 reviews)  
Taperlock coupling insert element.
£4.14
including VAT £0.69

4" Wide 4ply 5.5mm Thick Balata Flat Belting
 
(0 reviews)  
Top quality heavy duty 4 ply (5.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
 
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
 
Sold by the linear metre, orders for multiples will be supplied in a single open length.
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.
£15.96
including VAT £2.66
Qty
Twin Groove V Pulleys, B Profile
 
(0 reviews)  

SPB section V pulleys, Suitable for B Section, SPB section, SPBX section & B section Nutlink, V and wedge belts.

SPB two groove V pulleys manufactured from high quality cast iron.

£11.62
including VAT £1.94

1.5" Wide 3ply 4.5mm Thick Balata Flat Belting
 
(0 reviews)  
Top quality heavy duty 3 ply (4.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
 
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
 
Sold by the linear metre, orders for multiples will be supplied in a single open length.
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.
£4.30
including VAT £0.72
Qty