- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The blue packs (PLB) we supply are for measuring clearances between 0.004" to 0.010"
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The green packs (PLC) we supply are for measuring clearances between 0.175mm - 0.50mm which equates to 0.007' - 0.020"
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The Brown packs (PLD) we supply are for measuring clearances between 0.020″ to 0.040″ (0.500mm – 1.00mm).
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The Black packs (PLE) we supply are for measuring clearances between 0.030″ to 0.070″ (0.75mm – 1.75mm).
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The red packs (PLA) we supply are for measuring clearances between 0.025mm - 0.175mm which equates to 0.001' - 0.007"
Should be stored below 35°C
- Marine drive shaft bearings
- Stationary Engine bearings
- Turbine housing bearings
- Pump and pressure system bearings
Plastigauge ® also lends itself to measuring shaft end-float, flatness and clearance in pipe-flanges and cylinder heads.
Plastigauge is highly effective for measuring the clearance in large bearings, possibly the most widely used application of Plastigauge is in the measurement of clearance in plain automotive bearings. The white packs (PLX) we supply are for measuring clearances between 0.018mm-0.045mm.
Should be stored below 35°C