A genuine Lister domed top piston P/N 1/1289 and ring set for Lister D type engines. Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212. Looks rusty but its just the wax coating, bright and shiny underneath!
A genuine Lister flat top piston P/N 1/1290, gudgeon pin and ring set for Lister DK type engines. Supplied complete with four rings, three compression rings for 3" diameter bore by 1/8" wide P/N D14 and one oil scraper ring also 1/8" wide P/N D212.
All the parts which would be required for a complete overhaul of both the valves on your Lister D engine. These items are available seperatly but if you require all the items buying them together in one go represents a discount of 10% saving you £10.15 on the regular price!
A quality Lister D replacement valve manufactured to original specification with a slotted stem to accept the carrier pin.
A pair of hardened valve caps suitable for use on Lister D engines. Carefully machined to be an exact replica of the originals including the slot to accommodate the valve stem carrier pin. The top surface may look a little rough in the picture but it is just the light on the picture, the surface is actually nicely ground to original Lister spec.
A pair of Lister D type valve spring carriers. Nicely machined and we have even had them Chemi blacked to help prevent corrosion. Ideal for use with our valves, guides and springs.
A pair of valve stem pins for use on Lister D engines. We have purposefully manufactured these a little over size to allow for final fettling ensuring a perfect fit. You will find them tight when used with our new valves but probably about right for an older valve that has already done some years work. Simple draw filling or even as little as a touch of emery paper should be all that is required to achieve an acceptable fit to your valve and spring carrier.
A pair of quality replacement valve springs for the Lister D type engine.
Categories
