Home / Petter Diesel Engine Spares / Petter PJ & PJW Engine Spares

Petter PJ & PJW Engine Spares

Petter PJ and PJW Engine Spares

Products

Sort by: Product Price Default Sales Rating

Bryce Type Fuel Pump Rubber Bellows

			(6 reviews)

Quality Bryce type fuel injection pump rubber bellows as used on many of the fuel pumps fitted to Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.

These fuel injection pump bellows are suitable replacements for Petter P/N 367900 and fit the following pump types and other not listed.

There are 2 fitted to each pump on the engine. Sold Individually

FA0AB080C0210

FA0AB080C0215

FA0AB080C0700

FA0AB080C0705

FA0AB080C0770

FA0AB080C0280

FA0AB080C0295

£4.99

including VAT

Qty

Bryce, Petter Fuel Pump FAOAB080C0295

		(0 reviews)

Quality refurbished Bryce fuel injection pumps suitable for use on Petter PJ and PJW single and multi cylinder engines.

These fuel injection pumps are suitable replacements for all Bryce pumps identified with the following number FAOAB080C0295

Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT

£132.00

including VAT

Bryce, Petter PJ Fuel Pump FAOAB080C0280

		(0 reviews)

Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PJ series engines.

These fuel injection pumps are suitable replacements for and supersede all Bryce pumps identified with the number A1AA80/6S280

Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT

£132.00

including VAT

Cartridge Fuel Filter Element - P/N 201-13118

			(16 reviews)

A replacement fuel filter element for the cartridge fuel filter assembly fitted to many Lister Petter engines.

Equivalent to Lister Petter P/N 201-13118

Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.

Dimensions are O.D. 55mm x I.D. 23mm x H 37mm

Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.

£5.10

including VAT

General Purpose Replaceable Paper Cartridge Air Filter

			(9 reviews)

A replaceable dry paper element type air filter assembly suitable for use on a huge variety of engines but especially Lister Petter engines.

£27.00

including VAT

Lister LD, LR, SL, SR & Petter AV, AVA, PH, PHW, PJ & PJW Oil Filter Element

			(8 reviews)

Genuine Lister Petter oil filter element part number 201-26020 and 258089.

Suitable for Lister LD, LR, SL, SR models as well as Petter AV, AVA, PH, PHW, PJ & PJW engines.

£10.52

including VAT

Lister Petter Fuel Filter Assembly - P/N 284359

			(3 reviews)

The later type of cartridge fuel filter assembly used widely across the Lister Petter range, including engine series:-

Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.

Fitted with an aluminium top cover and a bowl to house the replaceable paper filter element. The top cover is female threaded to accept 1/4" BSP male unions at either side.

Equivalent to Petter P/N 95713, 284359, ASE64, ASE64A, AD600, 201-11613, 201-11614 and 201-11615

Many seasoned Lister Petter engine owners will recognise this as the standard AD600 type filter which accepts the common ACD60 paper element which is now known on P/N 201-13118 which is available separately if required.

£57.20

including VAT

Petter 1.5" Starting Handle P/N 193374

			(3 reviews)

Petter style starting handles suitable for engines using 1.5" crankshaft diameters with a keyway to provide a location point for the ratchet pin housed in the starting handle to engage with.

Equivalent to Petter part number 193374.

£38.40

including VAT

Qty

Petter Air Filter Element 289185

			(6 reviews)

Genuine Lister Petter air filter elements as fitted to Petter PH engines.

The dimensions are 135mm O.D. x 80mm I.D. x 115mm H.

Lister Petter part number 289185

£15.50

including VAT

Petter AV, AVA, PH & PJ Small End Bush

			(1 reviews)

Quality small end bush bearings for the well known Petter AV, AVA, PH and PJ Diesel engines.

Please select the right bush for your engine from the drop down list.

You will need to purchase one bush per small end, i.e two bushes for a twin cylinder engine.

£14.09

including VAT

Petter AV, AVA, PH, PHW & PJ Valve Guide

			(1 reviews)

Petter valve guides for the well known Petter AV, AVA, PH, PHW and PJ range of Diesel engines.

Equivalent to Petter part numbers 392954 and 340736.

You will need to purchase one guide per valve, i.e two guides per cylinder head on the engine.

£14.40

including VAT

Petter AV2, AVA2, PH2, PH2W, PJ2 / Lister HA2 & 3, HR2 & 3 Oil Filter Element

			(12 reviews)

Genuine Lister Petter oil filter element for the Petter AV2, AVA2, PH2, PH2W, PJ2 and also Lister HA2 & 3 as well as HR2 & HR3 engines.

Lister Petter part number 352-31720 which supersedes 250657

£9.72

including VAT

Petter Fuel Pump Element 8mm Bryce 1/559

			(2 reviews)

Quality Bryce type fuel pump elements.

These 8mm 1/559 elements are suitable for use in Bryce FAOABO80C0210, FAOABO80C0280 and FAOABO80CO770 fuel pumps as commonly used on Petter PH, PHW and PJ single and multi cylinder engines.

These elements only fit into Bryce FA0AB080C0210, FAOABO80C0280, FAOABO80CO700 and FAOABO80CO770 type pumps.

£24.00

including VAT

Petter PH & PJ Big End Bearing Shells - All Sizes

			(1 reviews)

High quality big end bearing shell sets for the well known Petter PH and PJ Diesel engines.

Available in a range of sizes, please select the size required when ordering.

Equivalent to Lister Petter part number 392989. You will need to purchase one set per big end, i.e two sets for a twin cylinder engine.

£12.00

including VAT

Petter PH & PJ Centre Main Bearing - All Sizes

		(0 reviews)

Petter centre main bearing shell sets for the well known Petter PH and PJ Diesel engines.

Lister Petter part number 392994.

Available in a range of sizes, please select the size required from the menu when ordering.

£17.30

including VAT

Petter PH & PJ Crankshaft Thrust Washer P/N 367810

		(0 reviews)

Petter crankshaft thrust washer for the well known Petter PH and PJ Diesel engines.

Lister Petter part numbers 367810, 257762 and HJC23.

£15.10

including VAT

Qty

Petter PH & PJ Gear End Main Bearing - All Sizes

		(0 reviews)

Gear end main bearings for the well known Petter PH and PJ Diesel engines.

Available in a range of sizes, please select the size required from the menu when ordering.

£15.00

including VAT

Petter PH Rocker Feed Oil Pipe P/N 318623

			(2 reviews)

Genuine Petter rocker feed oil pipe.

Lister Petter P/N 318623 which supersedes P/N JE43

£43.66

including VAT

Click here to subscribe for 'Back-in-stock' notifications

Petter PH1 Fuel Pipe - Filter To Pump P/N 262936

		(0 reviews)

A quality reproduction fuel pipe for the Petter PH1 engine equivalent to P/N 262936.

This pipe runs between the fuel filter and the fuel pump. The pump end swivel union fitting is threaded M14 x 1.5 and the filter end is supplied with a 1/4" BSP straight union, total pipe length is approx 15.5".

Supplied as a kit comprising of pipe, swivel union bolt and sealing washers.

Suitable for single cylinder engines only.

£24.00

including VAT

Qty

Petter PH2 Fuel Pipe - Filter To Pump P/N 262936

		(0 reviews)

A quality reproduction fuel pipe for Petter PH2 engines.

Equivalent to Petter P/N 262936.

This pipe runs between the fuel filter and the fuel pump. The pump end is supplied with a M14 x 1.5 straight union and the filter end is swivel union fitting in 1/4" BSP, total pipe length is approx 15.5".

Supplied as a kit comprising of pipe, swivel union bolt and sealing washers.

Suitable for twin cylinder engines only.

£24.00

including VAT

Click here to subscribe for 'Back-in-stock' notifications

Petter PJ Cylinder Barrel P/N 402443

		(0 reviews)

Quality non genuine cylinders for the later (post s/n 18270) air cooled Petter PJ Diesel engines.

Equivalent to Petter P/N 402443.

These cylinders are not interchangeable with early engines despite both using the same piston assembly P/N 359972.

Cylinder differences:-

Early style P/N 402442 base spigot OD is 109.44 mm ( 4.309”)

Later style P/N 402443 base spigot OD 104.90 mm ( 4.130”)

Please check your requirements carefully before ordering to ensure compatibility.

£102.00

including VAT

Petter PJ Early Type Injector Pipe - Pump To Injector P/N 198200

		(0 reviews)

Genuine Petter PJ early type high pressure injector pipe.

Petter P/N 198200

This pipe runs between the fuel pump and the fuel injector.

£26.76

including VAT

Petter PJ Exhaust Valve P/N 358046

		(0 reviews)

Non genuine exhaust valves for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 358046

£14.70

Market price: £22.64 save 35%

including VAT

Qty

Petter PJ Flywheel End Oil Seal P/N 314664

		(0 reviews)

Petter PJ flywheel end oil seal.

Equivalent to Petter part number 314664.

£21.60

Market price: £28.70 save 25%

including VAT

Petter PJ Fuel Injector Cooling Fin Sleeve P/N 272376 (Late Type)

		(0 reviews)

Petter PJ aluminium injector cooling fin assembly.

For later engines using cooling fin sleeve P/N 272376 which is compatible with Bryce injector code 99/320, NSDLA067D0468 or BKB50S5188 with parallel fixing stud positions.

These will not fit the early engines pre serial number 2455 which use Bryce injector code 99/236 Petter P/N 265585 using offset fixing stud positions.

£52.00

Market price: £105.06 save 51%

including VAT

Petter PJ Fuel Injector Cooling Fin Sleeve P/N 292004 (Early Type)

		(0 reviews)

Petter PJ aluminium injector cooling fin assembly.

For early engines using cooling fin sleeve P/N 292004 or CB85 which is compatible with Bryce injector code 99/236 Petter P/N 265585 using offset fixing stud positions.

These will not fit the later engines post serial number 2455 which use Bryce injector code 99/320, NSDLA067D0468 or BKB50S5188 with parallel fixing stud positions.

£34.00

including VAT

Petter PJ Fuel Injector Nozzle Copper Washer Petter P/N 265609

		(0 reviews)

Petter PJ injector copper washer.

Petter P/N 265609

£2.50

including VAT

Qty

Petter PJ Fuel Injector Nozzle HL140S24D397P3

		(0 reviews)

Quality Bryce compatible fuel injector Nozzles, suitable for use on Petter PJ single and multi cylinder engines.

Equivalent to HL140S24D397P3

£22.50

including VAT

Qty

Petter PJ Gear End / Extension Shaft Oil Seal P/N 265654 or CD30

		(0 reviews)

Petter PJ gear end / extension shaft oil seal.

Equivalent to Petter part number 265654.

£12.66

including VAT

Petter PJ Inlet Valve P/N 358502

		(0 reviews)

Non genuine inlet valves for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 358502

£14.40

Market price: £22.51 save 36%

including VAT

Qty

Petter PJ Piston Assembly 0.020" Over Size P/N 359973

		(0 reviews)

Good quality non genuine piston assembly for the well known Petter PJ and PJW Diesel engines on 0.020" over size.

Equivalent to Petter part number 359973

£76.80

including VAT

Petter PJ Piston Assembly 0.040" Over Size P/N 359974

		(0 reviews)

Good quality genuine Hepworth piston assembly for the well known Petter PJ and PJW Diesel engines on 0.040" over size.

Equivalent to Petter part number 359974

£76.80

including VAT

Petter PJ PJW & PJWZ Bryce 99/236 Fuel Injector - Early Type Petter P/N 265582

			(1 reviews)

Quality refurbished Bryce 99/236 fuel injectors which are Petter P/N 265582 suitable for use on Petter PJ, PJW and PJWZ single and multi cylinder engines.

These fuel injectors have been fully refurbished with new nozzles and are supplied with all required sealing washers for the nozzle and pipe connections.

Injector body type NSDLA067D0347

Fitted with nozzle HL140S24D397P3

Set at a pressure of 3150 PSI

Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT

£99.00

including VAT

Petter PJ Ring Set +0.020 Over Size

		(0 reviews)

Non genuine 0.020" over size piston ring sets for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 392957

You will need to purchase one set per piston, i.e two sets for a twin cylinder engine.

£33.60

Market price: £49.36 save 32%

including VAT

Petter PJ Ring Set +0.040 Over Size

		(0 reviews)

Non genuine 0.040" over size piston ring sets for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 392958

You will need to purchase one set per piston, i.e two sets for a twin cylinder engine.

£33.60

Market price: £49.36 save 32%

including VAT

Petter PJ Ring Set +0.060 Over Size

		(0 reviews)

Non genuine 0.060" over size piston ring sets for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 392959/060

You will need to purchase one set per piston, i.e two sets for a twin cylinder engine.

£33.60

Market price: £49.36 save 32%

including VAT

Qty

Petter PJ Ring Set, Standard Size

		(0 reviews)

Non genuine piston ring sets for the well known Petter PJ range of Diesel engines.

Equivalent to Lister Petter P/N 392956

You will need to purchase one set per piston, i.e two sets for a twin cylinder engine.

£33.60

Market price: £49.36 save 32%

including VAT

Click here to subscribe for 'Back-in-stock' notifications

Petter PJ, PJW & PJWZ Bryce 99/320 Fuel Injector Petter P/N 332609

		(0 reviews)

Quality refurbished Bryce 99/320 fuel injectors, suitable for use on Petter PJ, PJW and PJWZ single and multi cylinder engines.

These fuel injectors have been fully refurbished with new nozzles and are supplied with sealing washers for the nozzle.

Injector body type NSDLA067D0468

Fitted with nozzle HL140S24D397P3

Set at a pressure of 3150 PSI for engines in the 1100 to 2000rpm range.

Please note that the reconditioned products are supplied on a service exchange basis, there will be a surcharge plus VAT

£105.00

including VAT

Petter PJ1 Inlet Manifold P/N 296165

		(0 reviews)

A genuine Petter inlet manifold.

Petter P/N CF32 or 296165

Suitable for single cylinder engines only.

£45.60

Market price: £157.50 save 71%

including VAT

Petter PJ1 Water Inlet Manifold P/N WCF28

		(0 reviews)

A genuine Petter PJ1 water inlet manifold.

Petter P/N WCF28

Suitable for single cylinder engines only.

£33.60

including VAT

Petter PJ1, PJ1Z, PJ2, PJ2Z, PJWZ Bottom Set

		(0 reviews)

A bottom end gasket set suitable for the Petter PJ1, PJ1Z, PJ2, PJ2Z and PJWZ engines.

Equivalent to Petter part number 344108.

£27.98

Market price: £61.65 save 55%

including VAT

Petter PJ1, PJ2, PJ1Z, PJ2Z, PJ3 & PJ4 Top Gasket Set

		(0 reviews)

A top end gasket set suitable for the Petter PJ1, PJ2, PJ1Z, PJ2Z, PJ3 and PJ4 engines.

Equivalent to Petter part number 359500.

£16.98

including VAT

Petter PJ2 Inlet Manifold P/N 296164

		(0 reviews)

A genuine Petter PJ2 inlet manifold.

Petter P/N CF43 or 296164

Suitable for twin cylinder engines only.

£57.60

Market price: £76.04 save 24%

including VAT

Petter PJ2 Inlet Manifold P/N CF43D

		(0 reviews)

A genuine Petter PJ2 inlet manifold for use when an oil bath air cleaner is fitted.

Petter P/N CF43D

Suitable for twin cylinder engines only.

£57.60

including VAT

Petter PJW Head Gasket

		(0 reviews)

Head gasket for Petter PJW engines.

Petter part number 287750 and WCB58

£28.98

including VAT

Qty

Petter Type Fuel Tank

			(6 reviews)

A good quality copy of the later type Petter 11 litre fuel tank complete with a cast iron mounting bracket and tank straps, could be used for any engine in need of a well made fuel tank.

The tank has a 1/4" BSP female threaded union on the bottom at one end for the fuel take off and a 1/8" BSP banjo style fitting in the top for the injector bleed off return pipe. This could easily be blanked off if not required.

£62.40

including VAT

Petter Type Plant Exhaust Silencer

		(0 reviews)

Good quality compact tractor style exhaust silencers as used on our Petteroid engine powered pump and generator sets etc.

These silencers could be used for any engine in need of a well made exhaust silencer that will accept the 2" bore pipe which clamps down at the base.

Overall length is 25" and the diameter of the main body section is approximately 3.5". Supplied with a suitable D clamp.

£35.40

including VAT

Click here to subscribe for 'Back-in-stock' notifications

Petteroid 1.5" Starting Handle

		(0 reviews)

Petteroid starting handles suitable for engines using 1.5" crankshaft diameters with a keyway to provide a location point for the ratchet pin housed in the starting handle to engage with.

Similar to Petter part number 193374 and can be used on genuine engine as well as the Petteroid copies.

£24.00

including VAT

Petter PJ & PJW Engine Spares

Products

Reviews

Special

Need help?

Petter PJ & PJW Engine Spares

Products

Categories

Reviews

Special

Need help?