A quality cork rocker cover gasket suitable for use with the AVA and PH series engines.
A good quality tractor style exhaust silencer as used on our petter engine powered pump and generator sets etc. This silencer could be used for any engine in need of a well made exhaust silencer that will accept the 2" female pipe which clamps down at the base. See the picture for the air cleaner below for an example of this silencer in use.
A good quality tractor style multi stage air filter as used on our Petter engine powered pump and generator sets etc. This filter could be used for any engine in need of a well made multi stage air filter that will accept the 1.5" female pipe which clamps down at the side of the main filter assembly. This filter has several stages of particulate removal including a top dust separation bowl with sight glass and several inner filters with an oil bath section located at the very bottom which can be removed for periodic cleaning. See the bottom half of the picture for an example of how the air cleaner is arranged, this is without a doubt our finest air cleaner to date.
A very good quality 10mm pitch ring gear which is the same as we fix to the flywheel rim on the Petter type engines to make a self start system.
A superb quality single banjo fitting suitable for use on most of the Petter type fuel systems, offers flexibility when you might want to form custom fuel lines for your own individual setup. Plated for corrosion resistance.
A superb quality single banjo bolt suitable for use on the Bosch Mico fuel pumps which have a smaller connection than the original CS engines used. Plated for corrosion resistance.
A top end gasket set suitable for Petter AVA1, AVA2, PH1 and PH2 engines, equates to part number 359-503. This is a 1 cylinder set so for single cylinder engines please purchase one set, for the twin cylinder engines two sets will be required.
A bottom end gasket set suitable for Petter AV1, AV2, AVA1, AVA2, PH1, PH2, PH1W and PH2W engines, equates to part number 334-273.
