Petter A, A1 & W1 Engine Spares

A genuine Petter copper head gasket suitable for use on Petter A, A1, AP and PA1 engines.

Petter P/N 251082

Payen 2A670, CH670, HS2A670, AH670

Richard Hayne Ltd 98179

Petter A1 magneto floating coupling drive disc.

Equivalent to Petter P/N DD15

British made in our own machine shop from high quality black Acetal which is also known as Delrin which is a lightweight, low-friction and wear-resistant material which lends itself to being a good replacement for SRBP Paxolin which the originals were manufactured from.

Petter A, A1, W1 and PAZ1 crankshaft oil seal for the flywheel end of the engine.

Good quality Nitrile rubber rotary shaft oil seal equivalent to Petter P/N 250982

NGK B-4H spark plugs suitable for use in Wolseley WD1, WD2, WD9 and Petter A series 2 stationary engines.

Equivalent to a Lodge B14

Petter A1 and W1 big end bearing shells on standard size.

Please note:- Genuine Petter or aftermarket bearings for this application are now very difficult to source, as such we have identified a bearing which is of the same physical size and readily available from another application that can be made to fit with only minor modification. You will only need to drill the oil way hole in the centre position of the plain half shell, the other half shell has an extra oil hole in it but this will not present any problem in service, it simply becomes redundant.

Petter A1 and W1 main bearing bush 0.030" under size.

Genuine new, old stock Petter part.

Petter A1 and W1 inlet / exhaust valve.

Genuine new, old stock.

Petter part number 201909