Non Geuine Lister SR3 top end or decoke gasket set.
Lister SR2 air cooled overhaul gasket set.
Includes flywheel end felt crankshaft oil seal.
Equivalent to Lister Petter P/N 657-10768
Lister TS3 air cooled Diesel, 3 cylinder, 1900cc 1983 - on
No oil seals but includes valve stem seals. Equates to 657-29531
Weight of set and packing approximately 1000g Pack size 310 x 430 x 40
The manufacturer recommends that the TS3 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Equivalent to Lister P/N 657-19747
Lister SR2 air cooled Diesel, 2 cylinder, 1104cc, 1961 - 75
Equates to 657-10758
Weight of set and packing approximately 460g Pack size 310 x 430 x 40
Lister TS3 air cooled Diesel, 3 cylinder 1900cc
Valve stem seals included. Equates to 657-29521
Weight of set and packing approximately 600g Pack size 250 x 330 x 40
The manufacturer recommends that the TS3 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Equivalent to Lister P/N 657-19727
Oil seals not included. Equates to 657-10748
Weight of set and packing approximately 530g Pack size 310 x 430 x 40
Lister TS2 air cooled Diesel 2 cylinder, 1265cc 1983 - on
No oil seals but includes valve stem seals.
Equates to 657-29511
Weight of set and packing approximately 750g Pack size 310 x 430 x 40
The manufacturer recommends that the TS2 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
A single gasket for the crank case access door on all single cylinder genuine Lister CS, L and J engines.
These will not fit onto twin cylinder engines or Indian build clone engines.
Equivalent to Lister P/N 657-19706
Lister SR1 air cooled Diesel, 1 cylinder, 552cc 1961 - 75
Oil seals not included. Equates to 657-10759
Weight of set and packing approximately 350g Pack size 310 x 430 x 40
Lister TS2 air cooled Diesel 2 cylinder, 1265cc, 1983 - on
Valve stem seals included. Equates to 657-29501
Weight of set and packing approximately 450g Pack size 220 x 280 x 40
The manufacturer recommends that the TS2 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Equivalent to Lister P/N 657-19716
Equivalent to Lister P/N 201-50610
Lister ST3 air cooled Diesel 3 cylinder 1900cc 1975 - 83
Includes flywheel end felt oil seal. Gear end oil seal not included.
Equates to 657-23557
Lister TS1 air cooled Diesel 1 cylinder, 635cc 1985 - on
No oil seals but includes valve stem seals. Equates to 657-32681
Weight of set and packing approximately 600g Pack size 310 x 430 x 40
The manufacturer recommends that the TS1 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
1 x Side cover gasket
Equivalent to Lister P/N 657-19686
Equivalent to Lister P/N 201-50620
Lister ST3 air cooled Diesel cylinder 1900cc 1975 - 83
Equates to 657-23541
Weight of set and packing approximately 550g Pack size 310 x 430 x 40
Lister TS1 air cooled Diesel, 1 cylinder, 635cc, 1985 - on
Includes valve stem seals. Equates to 657-32671
Weight of set and packing approximately 320g Pack size 220 x 280 x 40
The manufacturer recommends that the TS1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
A quality metallic manifold gasket suitable for use with the Petter AV, AVA, PH1, PH2 and PAZ1 series engines.
Equivalent to Petter P/N JB47 or 256926
Equivalent to Lister P/N 657-19697
Lister LV1 air cooled Diesel, 1 cylinder, 477cc, 1974 -
Includes felt oil seal and valve stem seals.
Equivalent to Lister P/N 657-29443
Equivalent to Lister P/N 201-50640
Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Oil seals not included. Equates to 657-23535
Weight of set and packing approximately 590g Pack size 310 x 430 x 40
Lister TR3 air cooled Diesel, 3 cylinder, 2325cc
No oil seals but valve stem seals included. Equates to 657-33391
Weight of set and packing approximately 1000g Pack size 310 x 430 x 40
The manufacturer recommends that the TR3 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Genuine Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Lister Petter part number 657-23523
Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Oil seals not included. Equates to Lister Petter part number 657-23520
Weight of set and packing approximately 375g Pack size 245 x 353 x 25
Lister TR3 air cooled Diesel, 3 cylinder, 2325cc
Includes valve stem seals and equates to 657-33381
Weight of set and packing approximately 460g Pack size 220 x 280 x 40
The manufacturer recommends that the TR3 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
A quality rocker cover gasket suitable for use with the AVA and PH series engines.
Equivalent to Lister P/N 202-11582
Equivalent to Lister P/N 201-26110
Lister ST1 air cooled Diesel 1 cylinder 635cc 1975 - 85
Oil seals not included. Equates to 657-23516
Weight of set and packing approximately 485g Pack size 310 x 430 x 40
Lister TR2 air cooled Diesel, 2 cylinder, 1550cc
No oil seals but includes valve stem seals, equates to 657-33371
Weight of set and packing approximately 610g Pack size 310 x 430 x 40
The manufacturer recommends that the TR2 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.
Bottom end gasket sets from a range of manufacturers suitable for Petter AV1, AV2, AVA1, AVA2, PH1, PH2, PH1W and PH2W engines, equates to Lister Petter part number 334273.
Equivalent to Lister P/N 353-15460
Lister ST1 air cooled Diesel 1 cylinder 635cc 1975 - 85
Equates to 657-23503
Weight of set and packing approximately 270g Pack size 245 x 353 x 25
Lister TR2 air Cooled Diesel, 2 cylinder, 1550cc
Includes valve stem seals and equates to 657-33361
The manufacturer recommends that the TR2 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
A quality lower rocker cover gasket suitable for use with the AVA and PH series engines.
Overhaul gasket sets suitable for use on Petter AVA1 and PH1 engines.
This set is effectivly a top end decoke set and a bottom end set in one package.
Equivalent to Lister Petter part number 334273 and 359503 combined into a single product.
Lister CS crankshaft oil thrower ring, suitable for use on older original Lister CS engines of all sizes which use the original style bush bearings.
Equivalent to Lister P/N: 008-02170, 8-2-170 and 5-1/B170.
A pair of new felt crankshaft oil seals, suitable for use on older original Lister CS engines of all sizes and Indian Listeroid engines which use the original style bush bearings.
Equivalent to Lister P/N: 003-00664
High quality overhaul gasket sets suitable for use on genuine Lister CS engines, models 3-1 and 3.5-1.
Equivalent to Lister Petter part number 657-10370
Not suitable for the other CS models which have a 4.5" cylinder bore and therefore utilise a different head gasket.