Equivalent to Lister P/N 201-50620
Equivalent to Lister P/N 201-50610
Equivalent to Lister P/N 201-50640
Suitable for use with SR, SL, LD and LR models.
This gasket is equivalent to Lister Petter part number 201-33420 and is made from a non-asbestos high temperature composite material.
A quality lower rocker cover gasket suitable for use with the AVA and PH series engines.
A quality rocker cover gasket suitable for use with the AVA and PH series engines.
This gasket is equivalent to Lister P/N 201-11130 or 201-11131.
This gasket equates to 201-80660 and 201-51040 and is made from a non-asbestos high temperature composite material.
Equivalent to Lister P/N 201-26110
A quality metallic manifold gasket suitable for use with the Petter AV, AVA, PH1, PH2 and PAZ1 series engines.
Equivalent to Petter P/N JB47 or 256926
Equivalent to Lister P/N 202-11582
Suitable for use with SR, SL, LD and LR models.
A single gasket for the crank case access door on all single cylinder genuine Lister CS, L and J engines.
These will not fit onto twin cylinder engines or Indian build clone engines.
Equivalent to Lister P/N 351-10510
A pair of new felt crankshaft oil seals, suitable for use on older original Lister CS engines of all sizes and Indian Listeroid engines which use the original style bush bearings.
Equivalent to Lister P/N: 003-00664
Equivalent to Lister P/N 352-15460
This gasket equates to 201-11130 and is made from a non-asbestos high temperature composite material.
Felt crankshaft oil seals equivalent to Lister Petter P/N 201-80281.
Suitable for use on Lister ST1, ST2, ST3, TS1, TS2 and TS3 engines.
Equivalent to Lister P/N 353-15460
Top quality non genuine copper/non asbestos head gasket suitable for use on air cooled Petter PH engines with an 87.3mm bore diameter.
Lister CS crankshaft oil thrower ring, suitable for use on older original Lister CS engines of all sizes which use the original style bush bearings.
Equivalent to Lister P/N: 008-02170, 8-2-170 and 5-1/B170.
A quality top end gasket set suitable for the Petter PAZ1 engine.
Equivalent to Lister Petter part number 264347 or to Payen part number CC430.
Lister ST1 air cooled Diesel 1 cylinder 635cc 1975 - 85
Equates to 657-23503
Weight of set and packing approximately 270g Pack size 245 x 353 x 25
Quality aftermarket Petter AVA1, AVA2, PH1 and PH2 engine decoke gasket sets.
Equivalent to Lister Petter P/N 359503.
This is a one cylinder set for single cylinder engines, If you need enough for a twin cylinder engine two sets will be required.
Valve stem seal included. Equates to 657-25999
Weight of set and packing approximately 240g
The manufacturer recommends that the LT1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
Lister SR1 air cooled Diesel, 1 cylinder, 552cc 1961 - 75
Oil seals not included. Equates to 657-10759
Weight of set and packing approximately 350g Pack size 310 x 430 x 40
Lister TR1 air cooled Diesel, 1 cylinder, 775cc
Equivalent to Lister Petter part number 657-33301
The manufacturer recommends that the TR1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
High quality de-coke gasket sets suitable for use on genuine Lister CS engines, models 5-1, 6-1, 8-1, 10-2, 12-2 and 16-2.
Equivalent to Lister Petter part number 657-10380. Two sets will be required for the twin cylinder models.
Not suitable for the 3-1 and 3.5-1 models.
Lister TS1 air cooled Diesel, 1 cylinder, 635cc, 1985 - on
Includes valve stem seals. Equates to 657-32671
Weight of set and packing approximately 320g Pack size 220 x 280 x 40
The manufacturer recommends that the TS1 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
The manufacturer recommends that the LR1 is decarbonised after 1000 hours, an exercise that will require the gaskets and joints contained in a top set.
A top end gasket set suitable for the Petter PJ1, PJ2, PJ1Z, PJ2Z, PJ3 and PJ4 engines.
Equivalent to Petter part number 359500.
Lister ST2 air cooled Diesel 2 cylinder 1265cc 1975 - 83
Oil seals not included. Equates to Lister Petter part number 657-23520
Weight of set and packing approximately 375g Pack size 245 x 353 x 25
1 x Side cover gasket
1 x Side Cover Gasket
Lister SR2 air cooled Diesel, 2 cylinder, 1104cc, 1961 - 75
Equates to 657-10758
Weight of set and packing approximately 460g Pack size 310 x 430 x 40
Lister TS2 air cooled Diesel 2 cylinder, 1265cc, 1983 - on
Valve stem seals included. Equates to 657-29501
Weight of set and packing approximately 450g Pack size 220 x 280 x 40
The manufacturer recommends that the TS2 is decarbonised after 1000 hours, an exercise that will require many of the gaskets and joints contained in a top set.
The manufacturer recommends that the LD1 is decarbonised after 1000 hours, an exercise that will require the gaskets and joints contained in a top set.
Lister TS1 air cooled Diesel 1 cylinder, 635cc 1985 - on
No oil seals but includes valve stem seals. Equates to 657-32681
Weight of set and packing approximately 600g Pack size 310 x 430 x 40
The manufacturer recommends that the TS1 engine is overhauled after 6000 hours, including the replacement of all joints and seals. This proceedure will require a full gasket set.