The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Petter Engine Spares :: Petter PH & PHW Engine Spares :: PH Cylinder, Piston, Rings & Bearings

PH Cylinder, Piston, Rings & Bearings

PH Cylinder, Piston, Rings & Bearings

Products

Petter PH Ring Set, Standard Size
 
(0 reviews)  
A single set of non genuine Lister piston rings for the well known Petter PH range of Diesel engines.
 
Equivelant to Lister Petter P/N 364789
 
You will need to purchase one set per piston, i.e two sets for a twin cylinder engine.
 
£13.64
including VAT £2.27
Qty Out of stock
Petter PH & PHW Piston Assembly Standard Size
 
(0 reviews)  
Quality non genuine piston assemblies for the well known Petter PH and PHW Diesel engines.
 
Equivalent to Petter part number HJC10
 
Supplied as a complete assembly on standard size with rings, gudgeon pin and clips.
 
£63.60
Market price: £160.24 save 60%
including VAT £10.60
Qty Out of stock
Petter PH & PHW Piston Assembly +0.010" Oversize
 
(0 reviews)  
Quality non genuine piston assemblies for the well known Petter PH and PHW Diesel engines.
 
Equivalent to Petter part number HJC10/010
 
Supplied as a complete assembly on 0.010" oversize with rings, gudgeon pin and clips.
 
£63.60
Market price: £160.24 save 60%
including VAT £10.60
Qty
Petter PH & PHW Piston Assembly +0.020" Oversize
 
(0 reviews)  
Quality non genuine piston assemblies for the well known Petter PH and PHW Diesel engines.
 
Equivalent to Petter part number HJC10/020
 
Supplied as a complete assembly on 0.020" oversize with rings, gudgeon pin and clips.
 
£63.60
Market price: £160.24 save 60%
including VAT £10.60
Qty
Petter PH & PHW Piston Assembly +0.040" Oversize
 
(0 reviews)  
Quality non genuine piston assemblies for the well known Petter PH and PHW Diesel engines.
 
Equivalent to Petter part number HJC10/040
 
Supplied as a complete assembly on 0.040" oversize with rings, gudgeon pin and clips.
 
£63.60
Market price: £160.24 save 60%
including VAT £10.60
Qty
Petter PH 87.3mm Cylinder
 
(0 reviews)  
Quality non genuine cylinders for the well known air cooled Petter PH Diesel engines operating on an 87.3mm bore diameter.
 
Equivalent to Petter part number 393033.
 
£99.60
including VAT £16.60
Qty Out of stock
Non Genuine Petter PH Cylinder Kit
 
(0 reviews)  
Non genuine cylinder kits for the well known air cooled Petter PH Diesel engines operating on an 87.3mm bore diameter.
 

Equivalent to Lister Petter part number 373800.

This kit consists of one cylinder, one piston with pin & clips and one ring set all on standard bore size.

 
£144.00
including VAT £24.00
Qty Out of stock
Non Genuine Petter PH Cylinder Stud & Nut Kit
 
(0 reviews)  
Non genuine cylinder stud and nut kits for the well known air cooled Petter PH Diesel engines.

Equivalent to Lister Petter part numbers:- Studs 208508 and Nuts 360575.

This kit consists of a full set of 12 x studs and 12 x nuts, sufficient for the top and bottom of one cylinder.

 
£14.40
including VAT £2.40
Qty
Petter AV, AVA, PH & PJ Small End Bearing Bush
 
(0 reviews)  
Quality small end bush bearings for the well known Petter AV, AVA and PH Diesel engines. Please select the right bush for your engine from the drop down list. JC16 or 258702 bushes fit the early engines with a 90° big end cap only, they will not fit the later engines which have the big end cap at a 45° angle, for this type the 332596 bush is required.
 
You will need to purchase one bush per small end, i.e two bushes for a twin cylinder engine.
 
£11.82
including VAT £1.97

Petter PH & PJ Big End Bearing Shells
 
(0 reviews)  
High quality standard size non genuine big end bearing shell sets for the well known Petter PH and PJ Diesel engines.
 
Equivalent to Lister Petter part number 392989.
 
You will need to purchase one set per big end, i.e two sets for a twin cylinder engine.
 
£12.00
including VAT £2.00
Qty
Petter PH & PJ Big End Bearing Shells -0.040" Under Size
 
(0 reviews)  
Genuine big end bearing shell sets for the well known Petter PH and PJ Diesel engines on 0.040" under size
 
Lister Petter part number 392993.
 
You will need to purchase one set per big end, i.e two sets for a twin cylinder engine.
 
£11.27
including VAT £1.88
Qty
Petter PH Main Bearing Flywheel End Standard Size
 
(0 reviews)  
Petter standard size flywheel end main bearing for the well known Petter PH and PJ Diesel engines.
 
Equivalent to Lister Petter part numbers 264905 and HJC8.
 
 
£15.00
including VAT £2.50
Qty
Petter PH Main Bearing Gear End Standard Size
 
(0 reviews)  
Petter standard size gear end main bearing for the well known Petter PH and PJ Diesel engines.
 
Equivalent to Lister Petter part numbers 264904 and HJC32.
 
 
£15.00
including VAT £2.50
Qty
Petter PH Main Bearing Gear End -0.040" Under Size
 
(0 reviews)  
Genuine Lister Petter -0.040" under size gear end main bearing shell set for the well known Petter PH and PJ Diesel engines.
 
Lister Petter part number 265484.
 
 
£40.80
including VAT £6.80
Qty
Petter PH Centre Main Bearing Shells
 
(0 reviews)  
Quality standard size genuine Lister Petter centre main bearing shell sets for the well known Petter PH Diesel engines.
 
Lister Petter part number 392994.
 
 
£12.00
including VAT £2.00
Qty Out of stock
Petter PH Centre Main Bearing Shells -0.010 Under Size
 
(0 reviews)  
Genuine Lister Petter -0.010" under size centre main bearing shell sets for the well known Petter PH Diesel engines.
 
Lister Petter part number 392995.
 
 
£26.40
including VAT £4.40
Qty