The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Transmissions - Pulleys & Belts :: Nut Link Belting

Nut Link Belting

NutLink and link style belts are a replacement for classical V belts up to C/22 cross section.

The link construction means that belts can be fitted easily and quickly even on inaccessible drives. Belts can be joined around the shafts without dismantling the drive. With link belting, there is no need to hold stocks of every belt length as it can be made to length on site simply by adding or removing links.

Products

Z Section Brammer Type Link Belting
 
(0 reviews)  
A good quality aftermarket Brammer style link belting manufactured from a flexible rubberised canvas material. Standard Z section size is 10-11mm nominal width across the top.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity in a single length.
£10.96
including VAT £1.83
Qty
A Section Brammer Type Link Belting
 
(0 reviews)  
A good quality aftermarket Brammer style link belting manufactured from a flexible rubberised canvas material. Standard A section size is 12-13mm nominal width across the top.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity in a single length.
£11.95
including VAT £1.99
Qty
B Section Brammer Type Link Belting
 
(0 reviews)  
A good quality aftermarket Brammer style link belting manufactured from a flexible rubberised canvas material. Standard B section size is 16-17mm nominal width across the top.

Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity in a single length.
£14.95
including VAT £2.49
Qty
C Section Brammer Type Link Belting
 
(0 reviews)  
A good quality aftermarket Brammer style link belting manufactured from a flexible rubberised canvas material.

Standard C section size is 22mm nominal width across the top. Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity in a single length.
£19.80
including VAT £3.30
Qty
Z Section T Head Link Belting
 
(0 reviews)  
Superb quality nut link style V belting in standard Z section size which has a nominal 10mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required. A common misconception is that this belting is used as a temporary fix....not true. This belting is designed to take heavy loads for long periods of time and can often out last a conventional V belt of the same size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity as a single length.
 
May be supplied in another colour than what is pictured. Genuine Fenner NuTLink belting is also available further down this page.
£20.40
including VAT £3.40
Qty Out of stock
A Section T Head Link Belting
 
(0 reviews)  
Superb quality nut link style V belting in standard A section size which has a nominal 13mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required. A common misconception is that this belting is used as a temporary fix....not true. This belting is designed to take heavy loads for long periods of time and can often out last a conventional V belt of the same size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity as a single length.
 
May be supplied in another colour than what is pictured. Genuine Fenner NuTLink belting is also available further down this page.
£22.80
including VAT £3.80
Qty
B Section T Head Link Belting
 
(0 reviews)  
Superb quality nut link style V belting in standard B section size which has a nominal 17mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required. A common misconception is that this belting is used as a temporary fix....not true. This belting is designed to take heavy loads for long periods of time and can often out last a conventional V belt of the same size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and we will supply your ordered quantity as a single length.
 
May be supplied in another colour than what is pictured. Genuine Fenner NuTLink belting is also available further down this page.
£26.40
including VAT £4.40
Qty Out of stock
Genuine Fenner Z Section NuTLink Belting
 
(0 reviews)  
Genuine Fenner NuT-Link® belting in standard Z section 10mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required to create your own Z section V belt to virtually any size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and join them together.
£29.64
including VAT £4.94

Genuine Fenner A Section NuT Link Belting
 
(0 reviews)  
Genuine Fenner NuT-Link® belting in standard A section 13mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required to create your own A section V belt to virtually any size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and join them together.
£31.56
including VAT £5.26

Genuine Fenner B Section NuT Link Belting
 
(0 reviews)  
Genuine Fenner NuT-Link® belting in standard B section 17mm top width.
 
Very handy for when its not easy to remove a belt because of enclosed machine heads etc, simply join it at the length required to create your own B section V belt to virtually any size.
 
Supplied in 1 metre lengths which equates to about 40 inches but if this is not sufficient for the job simply purchase two or more and join them together.
£36.66
including VAT £6.11