Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance the quick removal of sludge and lacquers. Golden Film Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination problem.
Application
Golden Film Flushing Oil can be used in petrol and diesel engines, hydraulic systems and compressors.
Directions For Use
(1) Run the system until it reaches normal running temperature.
(2) Drain old oil.
(3) Fill with Morris Flushing Oil between minimum and maximum fill levels.
(4) Run the system without load for 5 to 10 minutes.
(5) Drain flushing oil. Repeat steps 2 to 4 if necessary.
(6) Refill with recommended service fill lubricant.
(2) Drain old oil.
(3) Fill with Morris Flushing Oil between minimum and maximum fill levels.
(4) Run the system without load for 5 to 10 minutes.
(5) Drain flushing oil. Repeat steps 2 to 4 if necessary.
(6) Refill with recommended service fill lubricant.
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
