Is used in preference to normal commercially available enamels for decorative work of the highest standard. The quality of the finish allows for longer maintenance intervals to subsequent re-finishing. Ideal for heavy duty vehicle finishing, tractors, stationary engines, marine applications as well as for vehicle repair work. It has a very good resistance to oils, fats, and cutting oils / fluids etc, which makes it an ideal choice for all types of workshop machinery.

Touch dry:- 2 Hours.

Firm dry:- 6 Hours.

Hard dry:- 12 Hours.

Thinners:- Preferably fully synthetic BT8 or white spirits.

Over coating:- Within 30 minutes or after 16 hours.

Film  thickness:- 100 microns WFT gives approximately 50 microns DFT.

VOC:- 420g/l

Solids:- Approximately 43 to 55% dependent on colour.

Flashpoint:- Above 32ºC

Specific Gravity:- 0.90 to 1.12 approximately dependent on colour.

Viscosity:- 1.5 - 3.2 poise ICI Cone And Plate.

Temp Resistance:- 180ºC

Storage:- 12 months in original sealed containers.