The Lister silver maple leaf transfer set for early Lister stationary engines pre-1920 and Diesel models.
Suitable for the Lister H, J, K, L, M, N, P, Q, R, CS, CD & CE
These are water slide transfers and instructions for application are included.
- 1 x 6-Inch clockwise directional arrow 15.5cm x 3cm
- 1 x Silver maple leaf transfer 11cm x 8.5cm
- 1 x Large water tank Lister transfer 37cm x 12.5cm
*NB: Dimensions are approximate.
Lister 5" fuel tank water slide transfer decal.
Lister fuel tank transfer dimensions are approximately 12cm x 6cm.
Lister 8" fuel tank water slide transfer decal.
Lister fuel tank transfer dimensions are approximately 20cm x 10cm.
British made water slide transfer decal sets for both the Lister A and B type engines. This set is for hopper cooled engines.
- 1 x Directional arrow 15.5cm x 2.7cm
- 1 x Water level indicator 17.5cm x 1.1cm
- 1 x The Lister Junior 13cm x 10.9cm
- 1 x 5-Inch Lister transfer 12cm x 6cm
*NB: Dimensions are approximate.
Water slide transfer decal set for both the Lister A and B type engines. This set is for the tank cooled engines and includes four transfers as follows:-
- 1 x Directional arrow 15.5cm x 2.6cm
- 1 x Water level indicator 13cm x 1.2cm
- 1 x The Lister Junior 13cm x 10.9cm
- 1 x Large water tank Lister transfer 37cm x 12.5cm
*Note: Dimensions are approximate.
An authentic transfer / decal set for the Lister D, DK & F Type stationary engines.
These suit both hopper and tank cooled versions and comprise of a set of four transfers.
These are top quality water slide transfers manufactured in the UK, instructions for application are included.
- 1 x "The Lister" logo 14cm x 5cm
- 1 x Clockwise 4-inch arrow 10cm x 2cm
- 1 x Water level indicator 17.5cm x 1.1cm
- 1 x "Manufactured by" transfer 11.5cm x 3cm
*NB: Dimensions are approximate.
Clockwise and anti-clockwise rotation arrow sets available in either 4' or 6" sizes.
Intended for Lister or Petter engines but could be used on any make if you wish.
A set of 5 Lister water slide transfers intended for use on the Lister H, J, K, L, M, N, P, Q and R engines as well as the early diesel engines including the Lister CS, CD and CE etc.
- 1 x "The Lister" transfer 10cm x 3cm
- 1 x Directional arrow 15.5cm x 2.7cm
- 1 x Water level indicator 17.5cm x 1.1cm
- 1 x "Manufactured by R.A Lister" 11cm x 3cm
- 1 x Large water tank "Lister" transfer 37cm x 12.5cm
*NB: Dimensions are approximate.
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
