Lister LR Engine Spares

Lister reduction box oil seal.

As used on the 2:1, 3:1 and 1:1.61 reduction boxes commonly coupled to Lister LD, LR, SR and ST engines.

Lister Petter part number 201-22420

Lister LD, LR, LT, LV, SL and SR thrust washer set.

Lister Petter P/N 201-123810

Good quality non genuine Lister LR & SR main bearings.

Available on a variety of sizes and suitable for both the flywheel end and the gear end of LR and SR engines.

Equivalent to Lister Petter P/N 201-50060

Please select either standard or under size from the menu when ordering.

Lister style swivel union plugs / banjo bolts equivalent to Lister P/N 201-53400

Suitable for use on the Bryce FAOABO series cast iron bodied fuel pumps as fitted to the Lister LD, SL, SR and ST series engines.

Threaded 1/4" BSP 19TPI.

Lucas / Delphi or equivalent quality brand 1/488C fuel pump element.

Suitable for use in Lister LR fuel pumps with pump number FAOAB060P6656

Lister fuel pump shims for Bryce FAOAB fuel pumps used on many Lister single and multi cylinder engines.

Fits the following applications and more:-

Lister LD, LR, SL, SR, ST, HR

Lister P/N 201-11520, 201-11530 & 201-11540

Available in a range of different thicknesses, please select accordingly from the options menu.

A high quality injector nozzle and pin suitable for the Lister LR series engines.

Lister part number 201-12063 or Bryce part number BDN4SDC6453

Genuine Lister small end bush for Lister LD and LR engines.

Lister Petter P/N 201-10150

A Lister LD, LR, SL and SR valve, Lister Petter part number 201-19360.

This valve is fitted in engines as follows:-

Lister LR inlet and exhaust.
Lister LD inlet and exhaust on engines built after 1959 from engine numbers 11936LD19 & 61192LD29 (Valve 201-10363 was used on Lister LD engines built prior to 1959 up to engine numbers 11935LD19 & 6119LD29).
Lister SL exhaust.
Lister SR exhaust on engines built prior to 1970.

Approximate head diameter 29mm. Sold individually.

Genuine Lister LR1 crankshaft, new and on standard size.

Lister P/N P/N 570-11310

Non genuine Lister LR piston ring sets on 0.040" over size.

Equivalent to Lister Petter P/N 570-12120/040

Non genuine Lister LR piston ring sets on 0.030" over size.

Equivalent to Lister Petter P/N 570-12120/030

Lister LR gudgeon pin

P/N 570-11309

Genuine Lister LR piston assembly.

Piston assembly P/N 570-11308

The piston assembly includes the rings, gudgeon pin and circlips.

Genuine cylinder kits for Lister LR engines.

These cylinder kits comprise of:- 1 x Cylinder P/N 201-70110 and 1 x Piston assembly P/N 570-11308

The piston assembly includes the rings, gudgeon pin and circlips.

A high quality cast iron starting handle suitable for Lister LD, LR, SL, SR, ST and HR engines requiring a 1.5" diameter starting handle.

Equipped with a sprung loaded ratchet pin that engages with the crankshafts key way.

Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW.

Equivalent to Lister P/N 201-12510.