The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Lister Engine Spares :: Lister L Engine Spares

Lister L Engine Spares

Products

HT Lead Terminal
 
(0 reviews)  

A quality brass HT lead terminal for the spark plug connection, for use with all standard spark plugs with screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.98
including VAT £0.33
Qty
Lister CS & L Oil Pump Priming Lever
 
(0 reviews)  

A solid cast oil pump priming lever and swivel pin. The pin is plated to prevent corrosion and the handle is painted yellow for visibility but could easily be changed to Lister mid Brunswick green.

These fit both the Lister CS and the Lister L type engines.

£9.96
including VAT £1.66
Qty
Spark Plug Knurled Terminal Nut M4 Thread
 
(0 reviews)  

A quality brass knurled nut for the spark plug terminal, threaded with an M4 thread for use with all standard spark plugs with metric screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.56
including VAT £0.26
Qty
Spark Plug Knurled Terminal Nut UNC Thread
 
(0 reviews)  

A quality brass knurled nut for the spark plug terminal, threaded with an 8-32 UNC thread for use with older spark plugs with UNC screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.56
including VAT £0.26
Qty
Lister L Valve
 
(0 reviews)  

A faithful reproduction of the Lister L cylinder head valve.

Carefully manufactured from top quality materials to be an exact copy of the originals.

£84.00
including VAT £14.00
Qty
Lister L Valve Guide
 
(0 reviews)  

A faithful reproduction of the Lister L cylinder head valve guide.

Carefully manufactured from top quality materials to be an exact copy of the originals.

£72.00
including VAT £12.00
Qty
Lister L Valve Spring Set
 
(0 reviews)  

A pair of valve springs for the Lister L type engine, superb quality springs chemi-blacked to original specification for authenticity.

Equivalent to part number 003-00382.

£26.08
including VAT £4.35
Qty
Lister CS & L Tappet Set
 
(0 reviews)  

Lister tappet sets compatible with the CS 3-1, 6-1, 8-1, 12-2 & 16-2 engines. The outer sections of these tappets are also compatible with the older Lister L type engines but the centre sections are not the same.

Supplied a pictured and well made with polished faces. You get a total of 5 pieces, 2 guides, 2 lifters and the threaded insert for the exhaust tappet.

£35.74
including VAT £5.96
Qty
Lister CS Tappet Clamp
 
(0 reviews)  

Pressed steel tapet clamp, not as good as the original cast iron I know, but we are are trying!

£3.31
including VAT £0.55
Qty
Lister L Cylinder Base Gasket
 
(0 reviews)  
A faithful reproduction of the Lister L cylinder base gasket. Carefully hand made from top quality materials to be an exact copy of the originals.
£1.50
including VAT £0.25

Lister L Head Gasket
 
(0 reviews)  

A faithful reproduction of the Lister L water cooled cylinder head gasket. Carefully die cut from top quality composite material to be a pattern copy of the originals.

These gaskets fit the engines ranging from 6hp to 9hp. Rough dimensions are 31cm long by 22.5cm wide.

£24.00
including VAT £4.00
Qty
Lister CS & L Flywheel Gib Key
 
(0 reviews)  
A single gib key for the standard Lister CS or L type engine keyway at 9/16" wide. If you are having or have had trouble removing one of the little blighters why not take a look at our custom made gib key pullers by clicking here.
 
Dont forget that to fit a Gib key properly you will need some Micrometer Blue!
£10.14
including VAT £1.69
Qty
Lister CS, B & L Exhaust Silencers
 
(0 reviews)  
Well made exhaust silencers with internal baffles for the Lister CS, B & L type engines.
 
A faithful copy of the original specification. The silencer has a 1,1/2" BSP male threaded pipe of approximately 3,1/2" long and the silencer measures 6" diameter by 2,3/4" deep.
 
These silencers are also suitable for use with Lister CS and L engines.
£30.00
including VAT £5.00
Qty
Lister CS Pepper Pot Exhaust Silencer
 
(0 reviews)  
Good quality exhaust silencers suitable for Lister CS and L type engines and all other similar sized engine using a silencer with this thread size fitting.

Supplied with a heat resistant black finish to help prevent corrosion and fitted with a male 1, 1/2" BSP threaded pipe for fitting directly into the exhaust elbow.
£19.98
including VAT £3.33
Qty
Lister CS, L & JP Exhaust Gasket
 
(0 reviews)  

High quality die cut copper - non asbestos laminated gaskets for the exhaust joint on all Lister CS, L and JP engines.

Equivalent to Lister P/N 003-00307 or 010-03057

£2.40
including VAT £0.40
Qty
Lister CS & L Oil Filler Flap
 
(0 reviews)  
A replacement cast iron oil filler flap for the Lister CS & L stationary engine, this part is often found with the end snapped off.
 
Supplied complete with a suitable gasket, fixing studs and nuts.
£12.00
including VAT £2.00
Qty
Instruction & Identification Plate Hammer Drive Rivets
 
(0 reviews)  

No.4 x 1/4" Hammer Drive Screws/Rivets.

Brass electro plated finish.

To suit Lister engine nameplates. Pack of 20 (Approx)

Head diameter = 5mm, shank diameter = 2.9mm

£1.99
including VAT £0.33
Qty
Brass Fuel Filter Mesh
 
(1 reviews)  
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburetor float chambers.
£3.98
including VAT £0.66
Qty
7mm HT Ignition Lead Cable - Black Hypalon
 
(0 reviews)  

7mm HT ignition lead cable, copper wire core type manufactured by Lucas from black Hypalon material.

This HT lead looks and feels like rubber and is good where high temperatures prevail.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 100m.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.
£3.00
including VAT £0.50
Qty
7mm Cotton Covered HT Ignition Lead Cable - Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Red/Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Red/Yellow
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Yellow/Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty