The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Lister Engine Spares :: Lister G1 & G2 Spares

Lister G1 & G2 Spares

A selection of spare parts suitable for use on the Lister G1 and G2 series of engines.

Products

HT Lead Terminal
 
(0 reviews)  

A quality brass HT lead terminal for the spark plug connection, for use with all standard spark plugs with screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.98
including VAT £0.33
Qty
Instruction & Identification Plate Hammer Drive Rivets
 
(0 reviews)  

No.4 x 1/4" Hammer Drive Screws/Rivets.

Brass electro plated finish.

To suit Lister engine nameplates. Pack of 20 (Approx)

Head diameter = 5mm, shank diameter = 2.9mm

£1.99
including VAT £0.33
Qty
Lucas RS1 Magneto Bearing CB End
 
(0 reviews)  
Quality replacement bearings for the Lucas RS1 Magneto.
 
Original Lucas Part Number 189289
Magneto bearing type E13 - 13mm x 30mm x 7mm - CB end.
£11.99
including VAT £2.00
Qty
Lucas RS1 Magneto Bearing Drive End
 
(0 reviews)  
Quality replacement bearings for the Lucas RS1 Magneto.
 
Original Lucas Part Number 189291
 
Magneto bearing type E15 - 15mm x 35mm x 8mm - Drive end.
£12.98
including VAT £2.16
Qty
Lucas RS1 Magneto Points Cover Brass
 
(0 reviews)  
New solid brass points covers for the Lucas RS1 Magneto.
 
Original Lucas Part Number 457489
£11.70
including VAT £1.95
Qty
Lucas RS1 Magneto Points Cover Spring Arm
 
(0 reviews)  
New chrome plated points cover retaining arms for the Lucas RS1 Magneto.
 
Original Lucas Part Number 457491
£11.70
including VAT £1.95
Qty
Lucas RS1 Magneto Points Cover Zinc Plated
 
(0 reviews)  
New Zinc plated points covers for the Lucas RS1 Magneto.
 
Original Lucas Part Number 457489
£11.70
including VAT £1.95
Qty
Lucas RS1 Magneto Points Set
 
(0 reviews)  

Newly manufactured points sets for the Lucas RS1 Magneto. Equivalent to the original Lucas Part Number of 457-525

£10.93
including VAT £1.82
Qty
Lucas RS1 Magneto Replacement Condenser
 
(0 reviews)  
A replacement condenser suitable for use on the Lucas RS1 Magneto's which were commonly fitted to the Lister D engines.
 
Suitable as a replcement to original Lucas Part Number 457524
£4.75
including VAT £0.79
Qty
Lucas RS1 Magneto Top Cover Screw Pair
 
(0 reviews)  
New stainless steel top cover retaining screws for the Lucas RS1 Magneto.
 
Equivalent to the original Lucas part, supplied as a set of two.
£1.82
including VAT £0.30
Qty
Lucas SR1 Magneto Points Set
 
(0 reviews)  

Newly manufactured points sets for the Lucas SR1 Magneto. Equivalent to the original Lucas Part Number of 458053.

Not to be confused with the points for the RS1 magneto.

£10.93
including VAT £1.82
Qty
Replacement Lucas RS1 Magneto Shims
 
(0 reviews)  
A replacement 0.036" thick shim suitable for use on the Lucas RS1 Magneto's which were commonly fitted to the Lister D engines.
 
Suitable as a replacement to original Lister Part Number 1/1292
£2.99
including VAT £0.50
Qty
Spark Plug Knurled Terminal Nut M4 Thread
 
(0 reviews)  

A quality brass knurled nut for the spark plug terminal, threaded with an M4 thread for use with all standard spark plugs with metric screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.56
including VAT £0.26
Qty
Spark Plug Knurled Terminal Nut UNC Thread
 
(0 reviews)  

A quality brass knurled nut for the spark plug terminal, threaded with an 8-32 UNC thread for use with older spark plugs with UNC screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

£1.56
including VAT £0.26
Qty
Lister G1 Head Gasket
 
(0 reviews)  

Lister G1 type head gaskets cleanly punched from high quality reinforced graphite based Klinger SLS material.

£27.60
including VAT £4.60
Qty
Brass Fuel Filter Mesh
 
(1 reviews)  
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburetor float chambers.
£3.98
including VAT £0.66
Qty
7mm Cotton Covered HT Ignition Lead Cable - Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Red/Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Red/Yellow
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm Cotton Covered HT Ignition Lead Cable - Yellow/Black
 
(0 reviews)  

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

£4.14
including VAT £0.69
Qty
7mm HT Ignition Lead Cable - Black Hypalon
 
(0 reviews)  

7mm HT ignition lead cable, copper wire core type manufactured by Lucas from black Hypalon material.

This HT lead looks and feels like rubber and is good where high temperatures prevail.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 100m.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.
£3.00
including VAT £0.50
Qty