Lister A & B Engine Spares

A quality reproduction of the governor spring used on Lister D, DK, A, AK, B and BK type engines.

The spring has twin tapered ends and a hook/loop as per the original design.

Equivalent to Lister P/N J127

Suitable for:-
Lister D & DK engines up to 1000 rpm.
Lister A, AK, B & BK engines over 600 rpm.

Quality replacement bearings for the drive end of Lucas RS and SR Magnetos.

Original Lucas Part Number N3048 and N2703

Also used on some MO1L magdynos.

Magneto bearing type N3048 - 15mm x 37mm x 8mm

A quality brass HT lead terminal for the spark plug connection, for use with all standard spark plugs with screw tops.

Also used on the following engines:- Lister A, B, J, K, L, and N type engines.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

Cotton covered HT ignition lead cable. This cable measures 7mm diameter and has a copper wire core. Manufactured in the UK from high quality PVC insulation material covered in a fire retarded cotton braid.

This HT lead looks and feels like a vintage product and is perfect for show engines and restorations where originality is important.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 25m.

7mm HT ignition lead cable, copper wire core type manufactured by Lucas from black Hypalon material.

This HT lead looks and feels like rubber and is good where high temperatures prevail.

Priced per 1 metre length. If you require a longer length simply add the required quantity of meters and your HT cable will be sent as one uncut length up to a max of 100m.

A length of new Simplex Magneto drive chain suitable for use on the Magneto drive of Lister A, B and Junior stationary engines.

A good quality, solid exhaust flange for the Lister A type of engine. It has a female 1,1/4" BSP thread to receive the exhaust pipe and the centre to centre distance of the mounting holes is 2.368 inches.

Lister A exhaust flange for the 2.5hp, 3hp and 3.5hp Junior engines. A good quality cast iron replica, this exhaust flange has a 1.25" BSP female thread to accept the exhaust pipe directly or an elbow. Equipped with two stud holes with 2.375” centres.

The flange is approximately 1” or 25mm thick.

Note: These are not suitable for the early single flywheel versions of these engines. They will also not fit the larger 4-5hp B type engines, which require a larger flange.

A good quality British made fuel pump rebuild kit for all later style Lister A, AK, B, BK and Junior fuel pumps with an external spring and dust cap. Will not fit the early pumps that have internal springs.

This kit consists of:-

1 x British made spring equivalent to Lister P/N 002-00452 or A452
1 x Length of quality Rayon gland packing string equivalent to Lister P/N 003-00335 or 3335
1 x Stainless steel suction ball valve 1/4" diameter equivalent to P/N 103-00119 or H119
1 x Stainless steel delivery ball valve 3/8" diameter equivalent to P/N 003-00327 or 3327

All of these parts were available from Lister when these engines had spare parts support, we have simply brought them together into a handy kit to make the job easier.
 

A high quality British made reproduction of the Lister A, B and L carburettor fuel cover.

Hand spun from quality brass material these polish up to provide a lovely shine.

Equivalent to Lister P/N 3523C

A quality reproduction of the governor spring used on Lister D, DK, A, AK, B and BK type engines.

The spring has twin tapered ends and a hook/loop as per the original design.

Equivalent to Lister P/N 3174

Suitable for:-
Lister D & DK engines up to 700 rpm.
Lister A, AK, B & BK engines up to 600 rpm.