The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Fuel & Water

Products

Lister D AMAL Carburetor Float Chamber Assembly
 
(0 reviews)  

Genuine AMAL carburetor float chamber assembly as used on Lister D engines.

Lister Part number 1A

Includes the float, float needle, float retaining clip, top cover with tickler and bottom inlet union.

£95.99
including VAT £16.00
Qty Out of stock
Lister D AMAL Carburetor Float Kit P/N RKC-525
 
(0 reviews)  

Genuine AMAL carburetor float kit as used on Lister D engines.

Lister Part number RKC-525

Includes, float, float needle and retaining clip.

£21.60
including VAT £3.60
Qty Out of stock
Lister D AMAL Carburetor Float Needle P/N 14-024
 
(0 reviews)  

Genuine AMAL carburetor float needle as used on Lister D engines.

Lister Part number 14-024

£12.00
including VAT £2.00
Qty
Lister D AMAL Carburetor Float Needle Retaining Clip P/N 4-230
 
(0 reviews)  

Genuine AMAL carburetor float needle retaining clip as used on Lister D engines.

Lister Part number 4-230

£2.06
including VAT £0.34
Qty
Lister D AMAL Float Chamber Banjo Washer P/N 4-053
 
(0 reviews)  

Genuine AMAL float chamber banjo washer as used on Lister D engines.

Lister Part number 4-053

Sold individually but you are likely to need two as one sits either side of the banjo / swivel union.

£0.73
including VAT £0.12
Qty
Lister D AMAL Float Chamber Cover Assembly P/N 14-208A
 
(0 reviews)  

Genuine AMAL float chamber cover assembly as used on Lister D engines.

Lister Part number 14-208A

Includes the tickler, tickler spring, tickler locking collar, tickler split pin and locking screw.

£23.52
including VAT £3.92
Qty
Lister D AMAL Float Chamber Nut P/N 14-178
 
(0 reviews)  

Genuine AMAL float chamber nut as used on Lister D engines.

Lister Part number 14-178

£1.46
including VAT £0.24
Qty
Lister D AMAL Float Chamber Washer P/N 14-175
 
(0 reviews)  

Genuine AMAL float chamber washer as used on Lister D engines.

Lister Part number 14-175

£0.60
including VAT £0.10
Qty
Lister D Carburetor Air Valve Plate Screws & Spring Washers
 
(0 reviews)  

Lister D carburetor air valve plate screws and spring washer set as used on Lister D carburetors to secure the small brass plate to the underside of the air intake casting.

This set comprises of three dome head slotted screws equivalent to Lister part number 027-01746 and three corresponding spring washers equivalent to part number S451. All bright electro plated to resist corrosion and maintain a nice appearance.

£3.00
including VAT £0.50
Qty
Lister D Carburettor Air Valve P/N D109
 
(0 reviews)  

Replacement Lister D carburetor air valves.

Equivelent to Lister part number D109 or 004-00109

£12.00
including VAT £2.00
Qty
Lister D Carburettor Air Valve Spring
 
(0 reviews)  

British made Lister D carburetor air valve springs.

Equivelent to Lister part number D100 or 004-00100

£4.80
including VAT £0.80
Qty
Lister D Carburettor Air Valve Spring Adjuster Lock Nut
 
(0 reviews)  

British made Lister D carburetor air valve spring adjuster lock nuts.

Equivelent to Lister part number S583.

Sold individually.

Manufactured from quality brass.

£1.48
including VAT £0.25
Qty
Copper Fuel Pipe (tank to carb)
 
(0 reviews)  

A high quality Lister D copper fuel pipe with unions to run from the tanks fuel tap to the connection on the bottom of the carburettors float chamber.

£11.99
including VAT £2.00
Qty
Lister D Brass Fuel Cock & Tank Filter Assembly
 
(0 reviews)  

Newly manufactured brass fuel taps and tank filter assemblies suitable for the Lister D stationary engines.

Equivalent to Lister P/N's D330, 12406, 1/1013C & 3197

The body of the tap incorporates 1/4" BSP threads, male - female and the tank filter is 1/2" BSP. The filter is covered with brass gauze soldered into place.

£28.80
including VAT £4.80
Qty
Three Way Fuel Cock 1/4" BSP
 
(0 reviews)  

Newly manufactured three way fuel taps suitable for the Lister D and Wolseley WD petrol / paraffin stationary engines.

Equivalent to Lister P/N D196 and Wolseley WD-390

The body of the tap incorporates 1/4" BSP male threads.

£28.80
including VAT £4.80
Qty
Machined Brass Bent Nose Water Drain Tap
 
(0 reviews)  
Excellent quality brass water drain tap for the Lister D type engine as well as many other engines. A difficult part to find these days!

The body of the tap incorporates a male 1/4" BSP thread.
£20.40
including VAT £3.40
Qty Out of stock
Cast Brass Bent Nose Water Drain Tap 1/4BSP
 
(0 reviews)  

Excellent quality brass water drain tap suitable for a wide range of stationary engines. A difficult part to find these days!

The body of the tap incorporates a male 1/4" BSP thread.

£19.85
including VAT £3.31
Qty
Cast Brass Bent Nose Water Drain Tap 1/4BSP GB
 
(0 reviews)  
Excellent quality brass water drain taps suitable for a wide range of stationary engines. A difficult part to find these days!

The body of the tap incorporates a male 1/4" BSP thread.
£19.85
including VAT £3.31
Qty
Brass Fuel Filter Mesh
 
(1 reviews)  
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburetor float chambers.
£3.98
including VAT £0.66
Qty