Home / Lister Diesel Engine Spares / Lister CS Engine Spares / Lister CS Spares / Fuel Tank, Pump, Injector, Pipes & Govenor / Fuel Tank, Filters & Pipes

Printable version

Fuel Tank, Filters & Pipes

Products

Sort by: Product Price Default Sales Rating

Banjo Bolt 14mm For Listeroids & Bosch Mico Fuel Pumps

		(0 reviews)

A good quality 14mm swivel union plug / banjo bolt.

Suitable for use on the fuel inlet union of Bosch Mico BPF1B style fuel pumps.

Plated for corrosion resistance.

£5.10

including VAT

Qty

Genuine Lister CS Fuel Tank Filter Strainer Gauze P/N 023-03212

			(1 reviews)

A genuine Lister brass fuel filter strainer gauze suitable for the original cylindrical fuel tanks often supplied on Lister CS and Start-O-Matic engines.

Also used on Lister JPM and JKM engines for the lubricating oil tank filter gauze.

These strainers measure 5.5" diameter.

£27.58

including VAT

General Purpose Fuel Tank Cap

		(0 reviews)

A general purpose fuel tank cap.

Bayonet fitting, dimensions as per the picture.

Ideal as a cost effective replacement where the sizes are suitable.

£7.20

including VAT

Qty

Lister CS Cast Iron Fuel Filter Assembly

		(0 reviews)

A cast iron fuel filter assembly with bleed nipple on the top and standard banjo connection for fuel in and out as fitted to Lister CS engines.

£50.40

including VAT

Listeroid CS Braided Fuel Pipe, Tank To Filter

		(0 reviews)

For the Indian Listeroid CS engines, a 24" long flexible braided fuel pipe to go between the fuel tank tap and the cartridge type fuel filter assembly.

The pipe is supplied with a female threaded union at the tap/tank end and a standard Listeroid CS type male union fitting at the filter end.

£14.04

including VAT

Qty

Lister CS Steel Injector Leak Off Pipe, 8mm

		(0 reviews)

Steel injector leak off pipes fitted with a 8mm by 1mm pitch union for the injector end and a banjo fitting for the tank end, suitable for use with our CS fuel tanks and modern injectors using metric threads.

£6.11

including VAT

Qty

Lister CS Flexible Injector Leak Off Pipe

		(0 reviews)

A flexible injector leak off pipe suitable for use with our Lister CS fuel tanks fitted with a banjo fitting on one end and a choice of nipples on the other end. The nipples supplied are an 8mm for use with Bosch Mico injectors and a 1/8" BSP nipple for the older CAV injectors.

£5.09

including VAT

Qty

Lister CS Steel Injector Leak Off Pipe Tail, 10mm

		(0 reviews)

Steel injector leak off pipe tails fitted with a 10mm by 1mm pitch union for the injector end and a plain pipe tail for connection via rubber pipe to the tank return, suitable for use with our CS fuel tanks and modern injectors using metric threads.

£3.90

including VAT

Qty

Genuine Lister CS Brass Fuel Cock 1/2" BSP, Male - Male, Lister P/N 010-07050

		(0 reviews)

Genuine Lister brass fuel tap with 1/2" BSP threaded ends for connection to the original cylindrical fuel tanks and pipes originally supplied on Lister CS and Start-O-Matic engines.

This brass fuel tap could also be used for other applications requiring a 1/2" BSP brass fuel tap for pipe to tank fitted applications.

£21.60

including VAT

Swivel Union Plug / Banjo Bolt 1/4" BSP

			(6 reviews)

A good quality 1/4" BSP swivel union plug / banjo bolt.

Equivalent to Petter P/N 831026

Suitable for use on the fuel filter assembly 284359 as commonly used on Petter AV, AVA, PH, PHW and Lister LD, SL, SR, ST engines etc.

Plated for corrosion resistance.

£5.10

Market price: £10.16 save 50%

including VAT

Qty

Lister CS Steel Injector Leak Off Pipe, 1/8 BSP

		(0 reviews)

Steel injector leak off pipes fitted with a 1/8" BSP union for the injector end and a banjo fitting for the tank end, suitable for use with our CS fuel tanks and older injectors using BSP threads such as orignal CAV units etc.

£6.11

including VAT

Lister CS Fuel Pipe, Wick Filter To Pump

		(0 reviews)

A pre-formed steel plated pipe with the original Lister CS type large Banjo fittings for use between the fuel pump and the fuel filter assembly.

£9.96

including VAT

Budget Brass Fuel Cock 3/8" BSP, Male - Male

			(1 reviews)

A budget quality brass fuel tap with 3/8" BSP threaded ends for connection to the fuel tank and pipe on Lister CS engines.

This brass fuel tap could also be used for almost any other application requiring a 3/8" BSP brass fuel tap.

£12.98

including VAT

Fuel Pipe Aluminium Sealing Washers, 10 Pack

		(0 reviews)

A pack of 10 replacement aluminium fuel pipe sealing washers.

These pesky little washers are commonly used to provide a seal in the more modern Lister-Petter fuel lines, found on the Lister Petter AD600 fuel filters and used throughout the fuel lines of the Listeroid CS engines.

Also commonly found on the Petter AV, AVA, PH and PJ range of engines as well as the later Lister ST, SR, TR, TS etc.

These washers are considered to be a single use item and should be replaced each time the joint is disturbed.

£0.60

including VAT

Qty

Lister Petter Fuel Filter Assembly - P/N 284359

			(3 reviews)

The later type of cartridge fuel filter assembly used widely across the Lister Petter range, including engine series:-

Lister LD, LR, LPA, LPW, LPWS, SL, SR, ST, VA, Later 31/2 -1. 6-1, 8-1, 12-2 and 16-2 engines.
Petter AA, AB, ABW, AC, ACW, AD, P600, PH, PHW, PJ, PJW engines.

Fitted with an aluminium top cover and a bowl to house the replaceable paper filter element. The top cover is female threaded to accept 1/4" BSP male unions at either side.

Equivalent to Petter P/N 95713, 284359, ASE64, ASE64A, AD600, 201-11613, 201-11614 and 201-11615

Many seasoned Lister Petter engine owners will recognise this as the standard AD600 type filter which accepts the common ACD60 paper element which is now known on P/N 201-13118 which is available separately if required.

£57.20

including VAT

Lister CS Braided Fuel Pipe, Tank To Filter (Original Type)

		(0 reviews)

For the older style Lister CS engines, a 26" long flexible braided fuel pipe to go between the engine mounted fuel tank's tap and the cast iron wick filter assembly.

The pipe is supplied with a 3/8" BSP female threaded union at the tank/tap end and a standard Lister CS size banjo fitting at the filter end.

This will not fit onto the very early barrel type fuel tanks that were wall mounted as they used a 1/2" BSP fitting but can be made to work with a suitable adaptor union to convert from 1/2" BSP to 3/8" BSP threads.

£14.04

including VAT

Multi Purpose Flexible Fuel Hose Kit

		(0 reviews)

A multi purpose flexible fuel pipe kit.

This kit contains:-

1 x 3/8"BSP male threaded hose tail union.

1 x 1/4"BSP male threaded hose tail union.

1 x 36" length of flexible fuel pipe with a 5/16" bore.

2 x Aluminium sealing washers

1 x Copper sealing washer

£3.60

including VAT

Fuel Leak Off Banjo Fitting 1/8" BSP

		(0 reviews)

Good quality banjo / swivel union fittings suitable for use on the top of our Lister CS fuel tank kits for the injector leak off return and also most of the Petter type fuel systems.

Offers flexibility when you might want to form custom fuel lines for your own individual setup.

Plated for corrosion resistance, threaded 1/8" BSP.

£5.10

including VAT

Lister CS Banjo Fitting 18mm For CAV Fuel Pumps

			(1 reviews)

Good quality 18mm banjo fuel pipe fittings suitable for use on the Lister CS fuel system.

These are the same size as used on original Lister CS / CAV fuel fittings - not compatible with Listeroid engines or the Bosch Mico type pumps which use a 14mm fitting.

Offers flexibility when you might want to form custom fuel lines for your own individual setup. Supplied plated for corrosion resistance.

£6.00

including VAT

Qty

Lister CS Fuel Tank Assembly

			(2 reviews)

A complete kit of parts to fit an 8 litre fuel tank assembly to both Indian Listeroid CS engines and genuine Lister CS engines.

Supplied complete with a pair of mounting brackets, fixing bolts, tank straps, shaped tank seating blocks, flexible leak off pipe with nipples for both 1/8" BSP and 8mm injector connections as well as a quality 3/8 BSP brass fuel shut off valve for the bottom of the tank.

The approximate dimensions of the tank are 17.5" long, 7.5" wide and 7.5" high. The cap on the top is a conventional bayonet fitting with a rubber sealing washer.

£85.00

including VAT

Lister CS & VA Injector Pipe

			(3 reviews)

A high pressure fuel line for connection between the fuel pump outlet and the injector inlet.

Equivalent to Lister part number 8-3-157 and 008-03157.

Suitable for fitting to single cylinder Lister CS engines and the number one cylinder on Lister CS twin cylinder engines.

£20.10

including VAT

Qty

Lister CS, JP, JK, FR, CE & CD Fuel Filter Wick

			(7 reviews)

A quality reproduction of the old type fuel filter wick for use in the standard cast iron fuel filter found on Lister CS, JP, JK, FR, CE and CD engines.

Supplied 60 inch long, complete with a metal nipple for a straight forward swap over.

£103.03

including VAT

Lister CS Fuel Banjo Copper Washer

			(1 reviews)

Copper washers suitable for use on the original type Lister CS fuel system banjo fittings.

These washers harden up with use and often stretch out of size and should be replaced with new ones once removed from the engine.

Sold individually.

£0.30

including VAT

Qty

Lister CS Fuel Line Dowty Seals

			(1 reviews)

Fed up with copper washers leaking on your fuel banjo connections?

We have the ideal solution!

These Dowty seals are a superior replacement seal for your Lister CS fuel lines Banjo fittings eliminating any leaks by having a small inner Nitrile rubber sealing ring formed within the metal outer ring.

The best way to form a reliable and re-useable seal on your Lister CS Banjo fittings.

£0.70

including VAT

Qty

Cartridge Fuel Filter Element - P/N 201-13118

			(16 reviews)

A replacement fuel filter element for the cartridge fuel filter assembly fitted to many Lister Petter engines.

Equivalent to Lister Petter P/N 201-13118

Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.

Dimensions are O.D. 55mm x I.D. 23mm x H 37mm

Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.

£5.10

including VAT