Banjo Bolt
A superb quality single banjo bolt suitable for use on the Bosch Mico fuel pumps which have a smaller connection than the original CS engines used. Plated for corrosion resistance.
Our price: £3.54
including VAT
£0.59
Bosch, Petter Type Fuel Injector Nozzle
Quality Bosch fuel injector Nozzles, suitable for use on many of the Indian copy Petter type single and multi cylinder engines.
These fuel injector nozzles are suitable replacements for most Indian 80mm to 90mm cylinder diameter Petteroid engines.
Our price: £15.00
including VAT
£2.50
Bosch, Petter Type Fuel Pump
Quality Bosch fuel injection pumps suitable for use on many of the Indian copy Petter type single and multi cylinder engines.
These fuel injection pumps are suitable replacements for 80mm to 90mm cylinder bore diameter engines.
Our price: £58.80
including VAT
£9.80
Brass Fuel Filter Mesh
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburettor float chambers.
Our price: £3.98
including VAT
£0.66
Bryce Type, Petter PH Fuel Injector Nozzle
Quality Bryce compatible fuel injector Nozzles, suitable for use on Petter PH single and multi cylinder engines.
Equivalent to HL13OS26C175P3
Our price: £17.70
including VAT
£2.95
Bryce, Petter Fuel Pump
Quality Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
These fuel injection pumps are suitable replacements for and supersede all Bryce pumps identified with the following numbers.
FA0AB080C0210
FA0AB080C0215
FA0AB080C0700
FA0AB080C0705
FA0AB080C0770
FA0AB080C0280
FA0AB080C0295
Our price: £78.00
including VAT
£13.00
Cartridge Fuel Filter Assembly - Late Type
The later type of cartridge fuel filter assembly fitted to Lister CS engines and also many other Lister Petter engines.
Fitted with an aluminium top cover and a pressed steel bowl to house the replaceable paper element. The top cover is female threaded to accept male unions at either side.
Our price: £22.74
including VAT
£3.79
Cartridge Fuel Filter Element - Late Type
Replacement fuel filter element for the later type of cartridge fuel filter assembly fitted to many Lister Petter engines.
Lister Petter P/N 201-13118
Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.
Dimensions are O.D. 55mm x I.D. 23mm x H 37mm
Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.
Our price: £3.78
including VAT
£0.63
Fuel Pipe Aluminium Sealing Washers, 10 Pack
A pack of 10 replacement aluminium fuel pipe sealing washers.
These pesky little washers are commonly used to provide a seal in the more modern Lister-Petter fuel lines, found on the Lister Petter AD600 fuel filters and used throughout the fuel lines of the Listeroid CS engines.
Also commonly found on the Petter AV, AVA, PH and PJ range of engines as well as the later Lister ST, SR, TR, TS etc.
These washers are considered to be a single use item and should be replaced each time the joint is disturbed.
Our price: £0.48
including VAT
£0.08
Lister LD & SL Oil Filter Element
Genuine Lister Petter oil filter element part number 201-20620 for LD and SL series engines.
Our price: £7.63
including VAT
£1.27
Lister SR & LR Oil Filter Element
Genuine Lister Petter oil filter element part number 201-20620 for SR and LR series engines.
Our price: £7.63
including VAT
£1.27
Petter AV, AVA Bryce Fuel Injector
Quality refurbished Bryce fuel injectors, suitable for use on Petter AV and AVA single and multi cylinder engines using the AL67SD249 body.
These fuel injectors have been fully refurbished with a new HLS261C175P3 nozzle and are supplied with all required sealing washers for the nozzle and pipe connections.
Injector body type AL67SD249
Fitted with nozzle HLS261C175P3
Set at a pressure of 3150 PSI
Our price: £78.00
including VAT
£13.00
Petter PH, Bryce Fuel Injector
Quality refurbished Bryce 99/208 fuel injectors, suitable for use on Petter PH and PHW single and multi cylinder engines.
These fuel injectors have been fully refurbished with new nozzles and are supplied with all required sealing washers for the nozzle and pipe connections.
Injector body type NSDLA067D0468
Fitted with nozzle HL130S26C175P3
Set at a pressure of 3150 PSI
These injectors fit onto pumps FA0AB080C0210, FA0AB080C0215 and FA0AB080C0770
Our price: £72.00
including VAT
£12.00
Petter PH1 & PH1W Oil Filter Element
Genuine Lister Petter oil filter element part number 258089 for the PH1 and PH1W series engines.
Our price: £7.63
including VAT
£1.27
Petter Type Fuel Tank
A good quality copy of the later type Petter 11 litre fuel tank complete with a cast iron mounting bracket and tank straps, could be used for any engine in need of a well made fuel tank.
The tank has a 1/4" BSP female threaded union on the botom at one end for the fuel take off and a banjo style fitting in the top for the injector bleed off return pipe. This could easily be blanked off if not required.
Our price: £45.95
including VAT
£7.66
Small Banjo Fitting
A superb quality single banjo fitting suitable for use on most of the Petter type fuel systems, offers flexibility when you might want to form custom fuel lines for your own individual setup. Plated for corrosion resistance.
Our price: £5.10
including VAT
£0.85
Categories
