The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.
The SAE 10W/40 classification makes the lubricant suitable for use in all canal boat engines where a SAE 15W/40 may be required. SAE 10W/40 will flow more rapidly at low temperatures providing improved component protection.
Click here
to subscribe for 'Back-in-stock' notifications
Application
Golden Film Flushing Oil can be used in petrol and diesel engines, hydraulic systems and compressors.
(2) Drain old oil.
(3) Fill with Morris Flushing Oil between minimum and maximum fill levels.
(4) Run the system without load for 5 to 10 minutes.
(5) Drain flushing oil. Repeat steps 2 to 4 if necessary.
(6) Refill with recommended service fill lubricant.
K383 ANTI-SEIZE COMPOUND
Description:
K383 is a lead free anti seize compound, made from high quality mineral oils, non-soap thickener incorporating copper powder and graphite. Anti-seize properties enable this grease to work even if the joints become so compressed that most of the compound is squeezed out, or excessive temperature flashes off the oily part of the compound. A fine film of copper particles always remain in joints or threads to prevent seizure.
Features:
- Prevents seizure and galling during assembly and therefore reduces assembly time.
- Enables the easy dismantling of components subjected to high temperatures.
- Provides an effect anti-seize in saturated conditions, including chemical environments and salt water.
- Enables fast and easy dismantling of components, allowing them to be reused after dismantling.
Applications:
The excellent anti seize properties of K383 make it ideal for lubricating brake linkages. The product is also recommended as a thread lubricant on studs, pipes, casings and whenever eventual disassembly must proceed smoothly. K383 can be used with confidence on the threads of pipes that carry very hot and corrosive liquids or gases, where it assists sealing and allows trouble free disassembly, including pipe fitting and valves in the chemical, petrochemical, gas and drilling industries. Apply sparingly by brush to the threaded components prior to assembly. For optimum performance, ensure that both the threaded surfaces are completely coated with K383.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.
K42EP Lithium Multipurpose Grease
Description:
K41EP to K43EP are premium quality multipurpose greases for use in all anti-friction and plain bearings subjected to high shock load and vibration conditions. They are used extensively for applications throughout industry and the automotive sector.
Features:
- Excellent extreme pressure and anti-wear performance.
- High degree of corrosion protection.
- Multi-purpose grease particularly for heavy duty applications.
Applications:
This range of Lithium greases is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. All these greases are particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads. These greases can be applied by gun or used in centralised systems, capable of pumping the appropriate NGLI grade. The preferred recommendation for heavy duty applications in trucks, coaches and buses would be K2EP.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.
K42EP Lithium Multipurpose Grease
Description:
K41EP to K43EP are premium quality multipurpose greases for use in all anti-friction and plain bearings subjected to high shock load and vibration conditions. They are used extensively for applications throughout industry and the automotive sector.
Features:
- Excellent extreme pressure and anti-wear performance.
- High degree of corrosion protection.
- Multi-purpose grease particularly for heavy duty applications.
Applications:
This range of Lithium greases is highly recommended for all automotive use where a multipurpose grease is required for wheel bearings and chassis lubrication. All these greases are particularly suited for the lubrication of construction and mining equipment such as bulldozers, scrapers, loading shovel and all off highway trucks where greased components are subjected to continuous heavy loads and shock loads. These greases can be applied by gun or used in centralised systems, capable of pumping the appropriate NGLI grade. The preferred recommendation for heavy duty applications in trucks, coaches and buses would be K2EP.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.
K99 WATER RESISTANT GREASE
Description:
K99 is a premium quality, water resistant grease for use in industrial and marine applications where the presence of water and humid atmospheres can effect lubricating performance and be detrimental to the protection of parts from corrosion. K99 is suitable for plain and antifriction bearings.
Features:
- High degree of water resistance.
- Excellent corrosion protection.
- Good sealing properties.
Applications:
Recommended for all plain and rolling element bearings operating in very wet conditions. K99 is an ideal choice if bearings are temporarily immersed in water or if there is contact with corrosive products. This product may be used in stern tubes where a grease of this consistency and type is recommended.
As with all greases used for the first time, check compatibility with the grease applied previously and if necessary purge prior to application. Likewise, as a general rule, take care not to over-lubricate and apply the quantity of grease recommended by the manufacturer.
The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.
The SAE 10W/40 classification makes the lubricant suitable for use in all engines where a SAE 15W/40 may be required. SAE 10W/40 will flow more rapidly at low temperatures providing improved component protection.
Lister Diesel Engine Spares
Lister CS Engine Spares
Lister Petrol Engine Spares
Petter Diesel Engine Spares
Petter Petrol Engine Spares
Paragon Paint Products
Gaskets & Gasket Sets
Magneto Spares & Ignition
Fuel Injection
Water Pumps & Spares
Stationary Engine Books & Transfers
Starting Handles (22)
Wolseley Engine Spares (35)
Ruston Hornsby Spares (32)
Stuart Turner Spares (8)
Fowler Engine Spares (2)
Associated / Amanco Engine Spares (16)
Crossley Engine Spares (6)
Brass Fuel Cocks & Water Drain Taps
Sight Feed Lubricators & Oil Level Gauges
Piston Rings - Loose
Alternators, Invertors, Base Plates & AVM's
Transmissions - Pulleys & Belts
Gasket Materials & Gland Packing
Fixings - Nuts, Bolts & Studs
Workshop Consumables
Tools (27)
Plastigauge
Clearance Corner (3)
Genuine Lister Parts stock
Lister Petter Engine Data
Peter Slater Fuel Injection Engineers Data Archive
