The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Petter Engine Spares :: Petter AV & AVA Spares :: Fuel Injection Spares

Fuel Injection Spares

Products

Banjo Fitting 10mm
 
(0 reviews)  
Good quality banjo fittings suitable for use on the top of our Lister Cs fuel tank kits for the injector leak off return and also most of the Petter type fuel systems.

Offers flexibility when you might want to form custom fuel lines for your own individual setup.

Plated for corrosion resistance.
£5.10
including VAT £0.85
Qty
Brass Fuel Filter Mesh
 
(1 reviews)  
A fine brass fuel filter mesh suitable for use in fuel tanks and filter assemblies. Also found in fuel taps and carburetor float chambers.
£3.98
including VAT £0.66
Qty
Bryce Type Fuel Pump Rubber Bellows
 
(0 reviews)  
Quality Bryce type fuel injection pump rubber bellows as used on many of the fuel pumps fitted to Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
 
These fuel injection pump bellows are suitable replacements for Petter P/N 367900 and fit the following pump types.
 
FA0AB080C0210
FA0AB080C0215
FA0AB080C0700
FA0AB080C0705
FA0AB080C0770
FA0AB080C0280
FA0AB080C0295
£3.00
Market price: £4.80 save 38%
including VAT £0.50
Qty
Bryce Type, Petter AV, AVA, PH & PHW Fuel Injector Nozzle
 
(0 reviews)  
Quality Bryce compatible fuel injector Nozzles, suitable for use on Petter AV, AVA, PH & PHW single and multi cylinder engines.
 
Equivalent to HL130S26C175P3
£17.70
including VAT £2.95
Qty
Bryce, Petter Fuel Pump
 
(0 reviews)  
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
 
These fuel injection pumps are suitable replacements for and supersede all Bryce pumps identified with the following numbers.
 
FA0AB080C0210
FA0AB080C0215
FA0AB080C0700
FA0AB080C0705
FA0AB080C0770
FA0AB080C0280
FA0AB080C0295
 
Please note that these pumps are supplied on a service exchange basis meaning you will need to send your old unit back to us. A surcharge will be applied if your old unit is not returned.
£132.00
including VAT £22.00
Qty
Petter AV & AVA Series 2 Bryce Fuel Pump FAOABO70B0111
 
(0 reviews)  
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter AV and the Petter AVA series 2 engines.
 
Bryce pump number FAOABO70B0111
 
£126.00
including VAT £21.00
Qty
Bryce, Petter Fuel Pump FAOABO70C0177
 
(0 reviews)  
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter AV, AVA, PH and the Petter PJ series engines.
 
These fuel injection pumps are suitable replacements for pumps marked FAOABO70C0177.
 
Supplied on a service exchange basis, a surcharge will apply if your old unit is not returned.
 
£126.00
including VAT £21.00
Qty Out of stock
Bryce, Petter Fuel Pump FAOABO80C0210
 
(0 reviews)  
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
 
These fuel injection pumps are suitable replacements for pumps marked FA0AB080C0210.
 
Supplied on a service exchange basis, a surcharge will apply if your old unit is not returned.
 
£126.00
including VAT £21.00
Qty Out of stock
Bryce, Petter Fuel Pump FAOABO80C0215
 
(0 reviews)  
Quality refurbished Bryce fuel injection pumps suitable for use on many of the Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
 
These fuel injection pumps are suitable replacements for pumps marked FA0AB080C0215.
 
Supplied on a service exchange basis, a surcharge will apply if your old unit is not returned.
 
£126.00
including VAT £21.00
Qty
Bryce, Petter Fuel Pump Rebuild kit
 
(0 reviews)  
Quality Bryce fuel injection pump rebuild kits suitable for use on the FAOBO 770 type fuel pumps used on many of the Petter single and multi cylinder engines including but not limited to the Petter PH and the Petter PJ series engines.
 
These fuel injection pump kits are suitable replacements for all Bryce pumps identified with the following numbers.
 
FA0AB080C0210
FA0AB080C0215
FA0AB080C0700
FA0AB080C0705
FA0AB080C0770
FA0AB080C0280
FA0AB080C0295
£42.00
including VAT £7.00
Qty
Cartridge Fuel Filter Assembly - Late Type
 
(0 reviews)  
The later type of cartridge fuel filter assembly fitted to Lister CS engines and also many other Lister Petter engines.
 
Fitted with an aluminium top cover and a pressed steel bowl to house the replaceable paper element. The top cover is female threaded to accept 1/4" BSP male unions at either side.
 
Equivalent to Petter P/N 284359, ASE64A and AD600
£22.74
including VAT £3.79
Qty
Cartridge Fuel Filter Element - Late Type
 
(0 reviews)  
Replacement fuel filter element for the later type of cartridge fuel filter assembly fitted to many Lister Petter engines.
 
Lister Petter P/N 201-13118
 
Fitted to a wide range of Lister Petter engines including but not limited to the AA, AB, AC and AD series, the LT, LV series, some early TS engines, most LD, LR, SL, SR, ST1, ST2, Petter PH, PJ, P600 and PAZ1 engines.
 
Dimensions are O.D. 55mm x I.D. 23mm x H 37mm
 
Many seasoned Lister Petter engine owners will recognise this as the element ACD60 for use in standard AD600 type filters.
£5.99
including VAT £1.00
Qty
Fuel Pipe Aluminium Sealing Washers, 10 Pack
 
(0 reviews)  
A pack of 10 replacement aluminium fuel pipe sealing washers.
 
These pesky little washers are commonly used to provide a seal in the more modern Lister-Petter fuel lines, found on the Lister Petter AD600 fuel filters and used throughout the fuel lines of the Listeroid CS engines.
 
Also commonly found on the Petter AV, AVA, PH and PJ range of engines as well as the later Lister ST, SR, TR, TS etc.
 
These washers are considered to be a single use item and should be replaced each time the joint is disturbed.
£0.48
including VAT £0.08
Qty
Lister Petter PH2 Fuel Lift Pump
 
(0 reviews)  
Lister Petter Fuel Lift Pump, Equivalent to Lister part number 361451, AC461-299 and BCD 2609/1, 250-66422, 7990262
 
Fitted to Petter PH2 models.
 
These lift pumps have a two hole fixing.
£16.79
Market price: £120.69 save 86%
including VAT £2.80
Qty
Petter AV & AVA Fuel Pipe - Pump To Injector
 
(0 reviews)  
Petter AV and AVA high pressure fuel pipes for connection between the fuel pump and injector.
 
Equivalent to Petter P/N's JE35 and 198314
 
Suitable for single cylinder engines and the number one cylinder of twin cylinder engines only, these will not fit the number two cylinder of twin cylinder engines.
£18.00
including VAT £3.00
Qty
Petter AV, AVA Bryce Fuel Injector
 
(0 reviews)  
Quality refurbished Bryce fuel injectors, suitable for use on Petter AV and AVA single and multi cylinder engines using the AL67SD249 body.
 
These fuel injectors have been fully refurbished with a new HLS261C175P3 nozzle and are supplied with all required sealing washers for the nozzle and pipe connections.
 
Injector body type AL67SD249
Fitted with nozzle HLS261C175P3
Set at a pressure of 3150 PSI
 
Supplied as a service exchange unit, a surcharge may apply if your old unit is not returned.
£78.00
including VAT £13.00
Qty Out of stock
Petter PH, Bryce 177 Fuel Pump Element 7mm
 
(0 reviews)  
Quality Bryce type fuel pump elements.

These 7mm 1/86D elements are suitable for us in Bryce FAOABO70C0177 fuel pumps as commonly used on Petter PH and PHW single and multi cylinder engines.
 
These elements only fit into Bryce FAOABO70C0177 type pumps.
£24.00
including VAT £4.00
Qty
Petter PH, Bryce 210 & 177 Fuel Pump Delivery Valve
 
(0 reviews)  
Quality Bryce type fuel pump delivery valves.

These delivery valves are suitable for us in Bryce FAOABO80210 and FAOABO70CO177 fuel pumps as commonly used on Petter PH and PHW single and multi cylinder engines.
 
These delivery valves only fit into Bryce FA0AB080C0210 and FAOABO70CO177 type pumps.
£13.80
including VAT £2.30
Qty
Petter PH, Bryce 210 Fuel Pump Element 8mm
 
(0 reviews)  
Quality Bryce type fuel pump elements.

These 8mm 1/559 elements are suitable for us in Bryce FAOABO80210 and FAOABO80CO770 fuel pumps as commonly used on Petter PH and PHW single and multi cylinder engines.
 
These elements only fit into Bryce FA0AB080C0210 and FAOABO80CO770 type pumps.
£24.00
including VAT £4.00
Qty
Petter PH, Bryce 770 Fuel Pump Delivery Valve
 
(0 reviews)  
Quality Bryce type fuel pump delivery valves.

These delivery valves are suitable for us in Bryce FAOABO80CO770 fuel pumps as commonly used on Petter PH and PHW single and multi cylinder engines.
 
These delivery valves only fit into Bryce FAOABO80CO770 type pumps.
£13.80
including VAT £2.30
Qty
Petter Type Fuel Tank
 
(0 reviews)  
A good quality copy of the later type Petter 11 litre fuel tank complete with a cast iron mounting bracket and tank straps, could be used for any engine in need of a well made fuel tank.
 
The tank has a 1/4" BSP female threaded union on the botom at one end for the fuel take off and a banjo style fitting in the top for the injector bleed off return pipe. This could easily be blanked off if not required.
£45.95
including VAT £7.66
Qty
Banjo Bolt 14mm For Listeroids & Bosch Mico Fuel Pumps
 
(0 reviews)  
Good quality 14mm banjo bolts.

Suitable for use on the Bosch Mico fuel pumps which have a smaller connection than the original Lister CS engines which used an 18mm thread.

Plated for corrosion resistance.
£3.54
including VAT £0.59
Qty