The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Transmissions - Pulleys & Belts :: Flat Belt Lacing & Vulcanised Joints

Flat Belt Lacing & Vulcanised Joints

Belt lacing also known as alligator belt joiners for flat belting.

Products

No.15 Alligator Style Belt Lacing
 
(1 reviews)  

High quality heavy duty flat belting joiner lacing strips for belts 3.2 to 4mm thick, sold by the length which is approx 235mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.

£7.55
including VAT £1.26
Qty
No.20 Alligator Style Belt Lacing
 
(0 reviews)  
High quality heavy duty flat belting joiner lacing strips for belts 4 to 4.8mm thick, sold by the length which is approx 290mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
£7.74
including VAT £1.29
Qty
No.25 Alligator Style Belt Lacing
 
(0 reviews)  
High quality heavy duty flat belting joiner lacing strips for belts 4.8 to 5.6mm thick, sold by the length which is approx 290mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
£8.04
including VAT £1.34
Qty
No.27 Alligator Style Belt Lacing
 
(0 reviews)  

High quality heavy duty flat belting joiner lacing strips for belts 5.6 to 7.1mm thick, sold by the length which is approx 290mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.

£9.24
including VAT £1.54
Qty
No.35 Alligator Style Belt Lacing
 
(0 reviews)  
High quality heavy duty flat belting joiner lacing strips for belts 7.1 to 7.9mm thick, sold by the length which is approx 290mm.

These belt lacing's are similar to the Alligator style lacings manufactured by Flexco. A length of the clip cut the width of your belt and hammered in at each on of the belt, the supplied pin is then inserted through the interlacing teeth to secure the two ends neatly together.
£11.64
including VAT £1.94
Qty
Vulcanised Balata Joint Service 3 Ply Up To 4 Inch Wide
 
(0 reviews)  
For applications where an endless belt is required we can join the open length Balata material with a special hot vulcanising technique that effectively provides and endless smooth overlap join for a clean, quiet and smooth belt operation.
 
This type of join is stronger than any of the mechanical fixings we have available and is without doubt the best option where quiet operation is required. No clickety clack of joiners passing over pulleys!
 
By adding this item to your basket we will perform a single vulcanised join to any required length of 3 ply belting up to 4" wide that is purchased from the website at the same time.
£42.00
including VAT £7.00
Qty
Vulcanised Balata Joint Service 3 Ply 4 To 6 Inch Wide
 
(0 reviews)  
For applications where an endless belt is required we can join the open length Balata material with a special hot vulcanising technique that effectively provides and endless smooth overlap join for a clean, quiet and smooth belt operation.
 
This type of join is stronger than any of the mechanical fixings we have available and is without doubt the best option where quiet operation is required. No clickety clack of joiners passing over pulleys!
 
By adding this item to your basket we will perform a single vulcanised join to any required length of 3 ply belting between 4-6" wide that is purchased from the website at the same time.
£45.00
including VAT £7.50
Qty
Vulcanised Balata Joint Service 4 Ply Up To 4 Inch Wide
 
(0 reviews)  
For applications where an endless belt is required we can join the open length Balata material with a special hot vulcanising technique that effectively provides and endless smooth overlap join for a clean, quiet and smooth belt operation.
 
This type of join is stronger than any of the mechanical fixings we have available and is without doubt the best option where quiet operation is required. No clickety clack of joiners passing over pulleys!
 
By adding this item to your basket we will perform a single vulcanised join to any required length of 4 ply belting up to 4" wide that is purchased from the website at the same time.
£46.20
including VAT £7.70
Qty
Vulcanised Balata Joint Service 4 Ply 4 To 6 Inch Wide
 
(0 reviews)  
For applications where an endless belt is required we can join the open length Balata material with a special hot vulcanising technique that effectively provides and endless smooth overlap join for a clean, quiet and smooth belt operation.
 
This type of join is stronger than any of the mechanical fixings we have available and is without doubt the best option where quiet operation is required. No clickety clack of joiners passing over pulleys!
 
By adding this item to your basket we will perform a single vulcanised join to any required length of 4 ply belting of between 4-6" wide that is purchased from the website at the same time.
£48.00
including VAT £8.00
Qty
No 1 Jackson Style Belt Fastener
 
(0 reviews)  
A more traditional method of joining the ends of your flat belting together.
 
Basically a large flat bolt plate that has spikes to grip the belting and an encapsulated bolt head, the other side has a nut and washer to clamp the two spiked plates tightly together.
 
Once in place and tight the ends of the exposed bolt threads can be ground off to leave a tidier finish.
 
Sold singularly so please select the quantity required in the box below.
£2.16
including VAT £0.36
Qty
No 1.5 Jackson Style Belt Fastener
 
(0 reviews)  
A more traditional method of joining the ends of your flat belting together.
 
Basically a large flat bolt plate that has spikes to grip the belting and an encapsulated bolt head, the other side has a nut and washer to clamp the two spiked plates tightly together.
 
Once in place and tight the ends of the exposed bolt threads can be ground off to leave a tidier finish.
 
Sold singularly so please select the quantity required in the box below.
£2.70
including VAT £0.45
Qty
No 2 Jackson Style Belt Fastener
 
(0 reviews)  
A more traditional method of joining the ends of your flat belting together.
 
Basically a large flat bolt plate that has spikes to grip the belting and an encapsulated bolt head, the other side has a nut and washer to clamp the two spiked plates tightly together.
 
Once in place and tight the ends of the exposed bolt threads can be ground off to leave a tidier finish.
 
Sold singularly so please select the quantity required in the box below.
£3.48
including VAT £0.58
Qty