The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 

Engine & Pump Oils

Please note that liquid products are available to UK mainland customers only due to shipping restrictions.

Products

Milking Machine Vacuum Pump Oil
 
(0 reviews)  
Milking machine vacuum pump oil is a high quality vacuum pump oil specially developed for use in milking machines.

This oil is formulated from specially selected highly refined mineral oils. Milking machine reliability is of the utmost importance in dairy management and therefore this product has been designed with the following outstanding features.
 
1. Rapid water separation ensuring that the oil does not emulsify with moisture or condensation.
2. Excellent filterability ensuring solid contaminants are easily removed from the oil, therefore promoting long pump life and reliability.
3. Low volatility that prevents oil constituents evaporating away during periods of high temperature operation.
4. Low pour point provides protection for the equipment when starting up and operating at temperatures below 0°C.
5. High viscosity index maintains the oil film at high temperatures.
6. The base fluid has been specially chosen to produce a long life product free of oxidation and sludging.

Milking machine vacuum pump oil is suitable for use in a variety of pumps designs operating in all temperatures and conditions. Also recommended for the lubrication of associated milk handling hydraulics and equipment.
£18.00
Market price: £26.60 save 32%
including VAT £3.00
Qty
Golden Film SAE 20 Oil - 5 Litre
 
(0 reviews)  
Golden Film Classic Oils are recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.
 
Modern dispersant additives keep combustion chamber contamination suspended in the lubricant, allowing full flow cartridge filters to remove it. Early oil filtration, usually in the form of a mesh gauze or strainer, is not efficient enough to remove this suspended material. Golden Film Oils are low dispersant oils and allow the suspended matter to drop harmlessly into the sump.
£18.00
Market price: £27.01 save 33%
including VAT £3.00
Qty
Golden Film SAE 30 Oil - 1 Litre
 
(0 reviews)  
Golden Film Classic Oils are recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.
 
Modern dispersant additives keep combustion chamber contamination suspended in the lubricant, allowing full flow cartridge filters to remove it. Early oil filtration, usually in the form of a mesh gauze or strainer, is not efficient enough to remove this suspended material. Golden Film Oils are low dispersant oils and allow the suspended matter to drop harmlessly into the sump.
£5.99
Market price: £9.02 save 34%
including VAT £1.00
Qty
Golden Film SAE 30 Oil - 5 Litre
 
(0 reviews)  
Golden Film Classic Oils are recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.
 
Modern dispersant additives keep combustion chamber contamination suspended in the lubricant, allowing full flow cartridge filters to remove it. Early oil filtration, usually in the form of a mesh gauze or strainer, is not efficient enough to remove this suspended material. Golden Film Oils are low dispersant oils and allow the suspended matter to drop harmlessly into the sump.
£18.00
Market price: £27.01 save 33%
including VAT £3.00
Qty
Golden Film SAE 40 Oil - 5 Litre
 
(0 reviews)  
Golden Film Classic Oils are recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.
 
Modern dispersant additives keep combustion chamber contamination suspended in the lubricant, allowing full flow cartridge filters to remove it. Early oil filtration, usually in the form of a mesh gauze or strainer, is not efficient enough to remove this suspended material. Golden Film Oils are low dispersant oils and allow the suspended matter to drop harmlessly into the sump.
£18.00
Market price: £27.01 save 33%
including VAT £3.00
Qty
Golden Film SAE 50 Oil - 5 Litre
 
(0 reviews)  
Golden Film Classic Oils are recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern multigrade, high additive level oils.
 
Modern dispersant additives keep combustion chamber contamination suspended in the lubricant, allowing full flow cartridge filters to remove it. Early oil filtration, usually in the form of a mesh gauze or strainer, is not efficient enough to remove this suspended material. Golden Film Oils are low dispersant oils and allow the suspended matter to drop harmlessly into the sump.
£18.00
Market price: £27.01 save 33%
including VAT £3.00
Qty
Morris Lubricants Golden Film 10W/40 Classic Oil - 5 Litre
 
(0 reviews)  
Golden Film SAE 10W/40 is a high quality multigrade engine oil designed for use in classic engines.

The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.

The SAE 10W/40 classification makes the lubricant suitable for use in all engines where a SAE 15W/40 may be required. SAE 10W/40 will flow more rapidly at low temperatures providing improved component protection.
£21.31
Market price: £28.62 save 26%
including VAT £3.55
Qty
Morris Lubricants Golden Film 10W/40 Marine Oil - 5 Litre
 
(0 reviews)  
Golden Film SAE 10W/40 is a high quality multigrade engine oil designed for use in canal boats.

The additive level has been chosen and optimised to prevent bore glazing or bore polishing, whilst keeping engine components clean and protecting them from wear and corrosion.

The SAE 10W/40 classification makes the lubricant suitable for use in all canal boat engines where a SAE 15W/40 may be required. SAE 10W/40 will flow more rapidly at low temperatures providing improved component protection.
£21.31
Market price: £28.62 save 26%
including VAT £3.55
Qty
Morris Lubricants Golden Film 20W/50 Classic Motor Oil - 5 Litre
 
(0 reviews)  
Golden Film SAE 20W/50 Classic Motor Oil is specialist high quality, low detergent/ dispersant multigrade lubricant. This oil is suitable for use in naturally aspirated four stroke petrol and diesel engines.
Golden Film SAE 20W/50 Classic Motor Oil is recommended for use in veteran, classic and vintage cars, motorcycles, commercial vehicles and tractors, where engine design and tolerances prohibit the use of modern high additive level oils.
£21.31
Market price: £25.43 save 16%
including VAT £3.55
Qty
Morris Lubricants Golden Film Flushing Oil - 5 Litre
 
(0 reviews)  
Golden Film Flushing Oil is a combination of highly refined light mineral oils and detergent/dispersant additives to enhance the quick removal of sludge and lacquers. Golden Film Flushing oil can be used where a system’s history is unknown or the service fill lubricant may have been used beyond its oil drain interval. This product can also be used if the service fill lubricant has to be drained because of a contamination problem.

Application
Golden Film Flushing Oil can be used in petrol and diesel engines, hydraulic systems and compressors.

Directions For Use

(1) Run the system until it reaches normal running temperature.
(2) Drain old oil.
(3) Fill with Morris Flushing Oil between minimum and maximum fill levels.
(4) Run the system without load for 5 to 10 minutes.
(5) Drain flushing oil. Repeat steps 2 to 4 if necessary.
(6) Refill with recommended service fill lubricant.
£21.60
Market price: £28.62 save 25%
including VAT £3.60
Qty
Morris Lubricants Golden Film Running In Oil - 5 Litre
 
(0 reviews)  
Golden Film Running In Oil is speciality product that should be used for the running in of new or rebuilt petrol and diesel engines, where it promotes the quick and safe bedding in of mating surfaces. The use of Running In Oil during the running in period helps remove the machining glaze from cylinder bores, assists the formation of important oil retaining surfaces, and therefore prevents the possibility of bore polishing.
 
Careful running in using this product can prevent any problems during this period and can greatly extend engine life. Running In Oil is blended from high quality mineral oils and a carefully balanced additive system.
£21.60
Market price: £27.01 save 20%
including VAT £3.60
Qty
R214 Cutting & Tapping Fluid
 
(0 reviews)  

Contains extreme pressure additives to reduce tool wear and improve machined finish

Tygris R214 is a ready to use cutting and tapping fluid specially formulated to improve tool performance and extend tool life. It contains additives to prevent pitting, galling and metal seizure and is suitable for use on hard to work metals including stainless steel, titanium, aluminium and tool steel.

Benefits

  • For cutting and tapping - reaming and turning
  • Extreme pressure additives for difficult materials
  • High pressure foaming discharge to aid penetration
  • Prolongs tool life and improves machined finish
  • Reduces heat build up
  • Suitable for use on all metals
  • Incorporates corrosion inhibitors
£4.75
including VAT £0.79
Qty
Tygris R266 Green Moisture Guard
 
(0 reviews)  

Protects against moisture for moulds and metal tooling

Tygris R266 is an effective moisture repellent, formulated to provide an ultra-thin green film for protection from corrosion of moulds and tooling whilst in store.

Benefits

  • De-watering capability
  • Protects from oxidisation and rusting
  • Ultra-fine film (3-5 microns) does not interfere with precision-fit parts or with gauging and measurement
  • Green colour to show treated parts
  • Resists creeping into ejector pins
  • Moulds off quickly
£4.75
including VAT £0.79
Qty
WD Power Spray. De-Watering, Anti-Rust Tool Protector
 
(0 reviews)  

Displaces water, penetrates, lubricates and protects

Tygris R213 is a high performance water displacement spray which actively drives out moisture, even from hard-to-reach areas, leaving a fine lubricating film which protects against corrosion. This film enables future dismantling of equipment. Also an effective cleaner and degreaser.

Benefits

  • Silicone free
  • Powerful water displacement properties
  • Leaves a shield against further moisture ingress
  • Leaves a protective film guarding against corrosion
  • Good general lubrication for most components
  • A rapid penetrant for seized fixings
£4.75
including VAT £0.79
Qty