DB Red (Currant red)

Is used in preference to normal commercially available enamels for decorative work of the highest standard. The quality of the finish allows for longer maintenance intervals to subsequent re-finishing. Ideal for heavy duty vehicle finishing, tractors, stationary engines, marine applications as well as for vehicle repair work. It has a very good resistance to oils, fats, and cutting oils / fluids etc, which makes it an ideal choice for all types of workshop machinery.

Touch dry:- 2 Hours.

Firm dry:- 6 Hours.

Hard dry:- 12 Hours.

Thinners:- Preferably fully synthetic BT8 or white spirits.

Over coating:- Within 30 minutes or after 16 hours.

Film  thickness:- 100 microns WFT gives approximately 50 microns DFT.

VOC:- 420g/l

Solids:- Approximately 43 to 55% dependent on colour.

Flashpoint:- Above 32ºC

Specific Gravity:- 0.90 to 1.12 approximately dependent on colour.

Viscosity:- 1.5 - 3.2 poise ICI Cone And Plate.

Temp Resistance:- 180ºC

Storage:- 12 months in original sealed containers.