A quality aftermarket Lister CS compression change over valve inner bung.
Equivalent to Lister P/N 008-03090 or 8-3-90
Supplied with copper sealing washers P/N 010-03091 and 010-03006
A solid steel threaded bung for the blanking off of the compression change over valve hole in the cylinder head.
Commonly used on the Lister 8-1 and 16-2 models which did not have a change over valve fitted because of the fixed compression ratio.
Equivalent to Lister P/N 008-03179 or 8-3-179.
The compression change over valve with original type black painted cast iron grip and all associated seals needed for a direct replacement. The instruction plate is particularly well made, no plastic stickers here!
The compression change over valve handwheel instruction plate rivets suitable for both genuine Lister CS engines and Indian made Listeroid engines.
Supplied in a pack of eight rivets.
A glow plug modification kit suitable for use on all of the Lister CS type of diesel engines, please click on this product for further details in the expanded description view.
A Lister CS cylinder head brass instruction plate.
Used engines are often found with this missing or badly damaged. These new ones make for the perfect finishing touch on a restored engine.
These are the same size as the originals and measure 6" wide by 4, 5/16" tall.
Three 9/16" Whitworth threaded studs and nuts for use on genuine Lister CS engines.
These studs are to hold the cylinder head in place in conjunction with the larger four cylinder studs.
The cast iron nut and associated threaded stud for holding down the rocker cover on all Lister CS engines.
Equivalent to Lister P/N's 026-00081, 027-00006 & 027-03701
Genuine Lister CS cylinder head locating washer.
Lister Petter P/N 008-03024 identified by illustration No. 10 in the picture.
Quality Whitworth 3/8" x 4,1/2" studs commonly found on Lister CS engines to hold down the rocker cover but could be used for any application requiring this size.
New, old stock Lister compression change over valve plug copper sealing washer for the CS, JP, JK & JS range of engines.
The Lister part number is 010-03091
Brand new, old stock Lister compression change over valve plug copper sealing washer for the CS, JP, JK & JS range of engines.
The Lister part number is 010-03006.
Quality Whitworth studs commonly found on the Lister CS fuel injector securing hold down plate but could be used for any application requiring this size of Whitworth Stud.
For suitable sized nuts please see the Whitworth nuts section.
Quality Whitworth studs commonly found on the water flanges of the Lister CS engines but could be used for any application requiring this size of stud.
No.4 x 1/4" Hammer Drive Screws / Rivets.
Brass electro plated finish.
To suit Lister engine name plates. Pack of 20 (Approx)
The head diameter = 5mm, shank diameter = 2.9mm
Quality Whitworth studs commonly found on the air & exhaust manifold flanges and the tappet clamp of the Lister CS engines but could be used for any application requiring this size of stud.