A replaceable cartridge type air filter suitable for use on all sorts of engines but particularly lends itself well to Lister and Petter engines.
A traditional oil bath air filter assembly with a round pipe clamp on the bottom for fitting to an elbow which is available seperatly.
A 90' elbow made from cast iron for use with either of our air filter assemblies.
A good quality thick, stamped gasket for the air inlet manifold to cylinder head joint on all CS engines new and old.
Top quality exhaust silencer suitable for the CS engine, supplied with a heat resistant black finish help prevent corrosion and has a male 1,1/2" BSP threaded pipe for fitting directly into the exhaust elbow.
A strong ninety degree bend for use on the exhaust outlet port of any CS type engine, can also be used on the air inlet, threaded with 1,1/2 BSP threads.
A solid cast flange with a female 1,1/2" BSP thread for use on the exhaust outlet port of any CS engine. The centre to centre distance of the stud holes is 3.5" which equates to about 90mm. This flange can also be used on the air inlet of a CS engine if you wish.
A high quality heat resistant stamped copper gasket for the exhaust joint on all Lister L and CS engines.
Categories
