The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Home :: Petter Engine Spares :: Petter AV & AVA Spares :: Air & Exhaust Spares

Air & Exhaust Spares

Products

Cartridge Air Filter
 
(0 reviews)  
A replaceable dry element type air filter suitable for use on Lister CS engines but particularly lends itself well to other Lister Petter engines.
£4.26
including VAT £0.71

Exhaust Silencer 1,1/4" BSP
 
(0 reviews)  
Well made exhaust silencers with internal baffles and gloss black powder coat finish.
 
These silencers have an 1, 1/4" BSP male threaded pipe of approximatly 1, 1/2" long and the silencer body measures 4, 1/2" diameter by 3, 3/4" long.
 
Can be used on Lister A, F, ST, SR, LD2 and Petter PH twin cylinder engines to name a few, also suitable for many other engines using this pipe thread size.
£19.20
including VAT £3.20
Qty
Petter Exhaust Manifold Flange 1" BSP Petter P/N 250438
 
(0 reviews)  
Petter exhaust manifold part number 250438.
 
Fitted to a wide range of Petter engines such as PH1, PJ1,AV, AVA & PAZ1 in applications such as dumpers, water pumps, generators and mixers.
 
These manifolds have a female 1" BSP socket to accept any suitable silencer or pipe.
 
Centre to centre distance of the stud holes is 2, 5/16"
£14.40
including VAT £2.40
Qty
Petter Exhaust Silencer
 
(0 reviews)  
Lister Petter exhaust silencer, part number 294158.
 
Fitted to a wide range of Lister Petter engines such as PH1, PJ1 AV, AVA & PAZ1 in applications such as dumpers, water pumps, generators and mixers.
 
This silencer uses a 1" BSP male end to screw into any suitable female manifold or extension pipe. These are new, old stock which have been in stock for some time and they have picked up a little surface rust. We have cleaned them up and re-treated with very high temperature silver paint (up to 500 celcius) so that they come up as good as new.
 
The length of the body is 85mm plus 35mm of threaded pipe and the silencer diameter is 115mm.
 
These retail from Lister Petter @ £117.46 plus postage & VAT. We are offering them at a bargain price!
£24.00
including VAT £4.00
Qty
Petter Type Plant Exhaust Silencer
 
(0 reviews)  

Good quality compact tractor style exhaust silencers as used on our Petteroid engine powered pump and generator sets etc.

These silencers could be used for any engine in need of a well made exhaust silencer that will accept the 2" bore pipe which clamps down at the base.

Overall length is 25" and the diameter of the main body section is approximately 3.5". Supplied with a suitable D clamp.

£24.00
including VAT £4.00
Qty Out of stock
Petter Type Plant Multi-stage Air Filter
 
(0 reviews)  
A good quality tractor style multi stage air filter as used on our Petter engine powered pump and generator sets etc.
 
This filter could be used for any engine in need of a well made multi stage air filter that will accept the 1.5" bore pipe at the side of the main filter assembly. This filter has several stages of particulate removal including a top dust separation bowl with sight glass and several inner filters with an oil bath section located at the very bottom which can be removed for periodic cleaning.
 
See the bottom half of the picture for an example of how the air cleaner is arranged, this is without a doubt serious air cleaner suitable for the most dusty of environments.
£46.94
including VAT £7.82
Qty