The cookie settings on this website are adjusted to allow all cookies so that you have the very best experience. If you continue without changing your cookie settings, we'll assume that you are happy to receive all cookies on our website. However, if you would like to, you can change your settings at any time using the Change cookie settings link in the Special menu. 
    
 
Petter AVA, PH & PAZ1 Engine Fuel Tank 6.8 Litre P/N 292970
Added: 18-05-2018
 
(0 reviews)  

Replacement 6.8 litre fuel tank suitable for Petter AVA, PH and PAZ1 engines.

Equivalent to Lister Petter part numbers 292970 and JE7

Supplied complete with a leak off connection and tank cap as well as the threaded union on the bottom of the tank.

The cap on the top is a conventional bayonet fitting with a rubber seal.

£66.00
including VAT £11.00
Qty
Lister LD1, LR1, SL1 & SR1 Engine Fuel Tank 1 Gallon P/N 201-11283
Added: 18-05-2018
 
(0 reviews)  

Replacement 1 gallon / 5 litre fuel tank suitable for Lister LD1, LR1, SL1 & SR1 engines.

Equivalent to Lister Petter part number 201-11283

Supplied complete with a leak off grommet and tank cap as well as the threaded union on the bottom of the tank.

The cap on the top is a conventional bayonet fitting with a rubber seal.

£59.95
including VAT £9.99
Qty
Lister CS 2.25" Big End Bearing Shells - Early Engines
Added: 17-05-2018
 
(0 reviews)  
The first batch of 5-1 engines and most pre 1940 3-1 engines have a 2.25" (2 ¼”) crank pin which require these special bearings.
 
Please check your crank pin diameter before ordering though as they are not all the same and could use the larger 2.5" bearings.
 
Three sizes are available, standard for a 2.25' crankpin and then in 0.010" increments for those who need to compensate for a worn crank pin after a re-grind.
£57.60
including VAT £9.60

Nickel Plated Oil Cup 1/2 x 5/16 BSW - Lister D
Added: 17-05-2018
 
(0 reviews)  
Good quality nickel plated oil cups fitted with an internal wick which acts as a self starting capillary syphon and delivers a slow and steady supply of lubricating oil.
 
The wick functions not only as a capillary feed but also as a filter resulting in only clean oil being delivered to the bearing or surface to be lubricated.
 
Body diameter 1/2"
Body height 1/2"
Thread size 5/16" BSW
£3.00
including VAT £0.50
Qty
Lister LT, LV, SR, ST, HA, HB & HR Fuel Injection Pump Delivery Valve
Added: 17-05-2018
 
(0 reviews)  

Lucas 1/338 fuel pump delivery valve suitable for use in Lister LT, LV, SR, ST, HA, HB and HR fuel pumps.

£14.40
including VAT £2.40
Qty
Lister LD, LR & SL Fuel Injection Pump Delivery Valve
Added: 17-05-2018
 
(0 reviews)  

Lucas 11/103B fuel pump delivery valve suitable for use in Lister LD, LR and SL fuel pumps.

£14.40
including VAT £2.40
Qty
Lister SR Fuel Injection Pump Element
Added: 17-05-2018
 
(0 reviews)  

Lucas / Delphi 1/313 fuel pump element suitable for use in Lister SR fuel pumps.

£14.40
including VAT £2.40
Qty
Lister LT & LV Fuel Injection Pump Element
Added: 17-05-2018
 
(0 reviews)  

Lucas 11/108DC fuel pump element suitable for use in Lister LT and LV fuel pumps.

£14.40
including VAT £2.40
Qty