Stationary Engine Parts Ltd :: Transmissions - Pulleys & Belts :: Flat Belting :: 3 Ply Belting 4.5mm Thick :: 2.5" Wide 3ply 4.5mm Thick Balata Flat Belting

2.5" Wide 3ply 4.5mm Thick Balata Flat Belting

2.5" Wide 3ply 4.5mm Thick Balata Flat Belting
Product Information

Top quality heavy duty 3 ply (4.5mm thick) flat belting manufactured from traditional cotton canvas impregnated with Balata rubber.
Balata Transmission Belting is a tough, robust belt material that has a rubber friction surface on both sides. It is constructed from premium quality high tensile cotton impreganted with natural rubber.
This belting is manufactured in accordance with Goodyear Akron, USA standards. It exceeds the requirement of ISS :1370 : 1965.

Technical Specification.

4 Ply
Tensile Strength (longitudinal) 190 Kn/m width.
Tensile Strength (transverse) 110 Kn/m width.
Adhesion** Not less than 3.0 Kn/M.
Minimum recommended pulley diameters for belting applications
3 Ply: 3" with fasteners
4" if endless.
Recommended Initial belt tension 1% - 1.5%

**Adhesion is the mean force required to strip one ply from the next

Finishing of cut edges.

The belting has square cut edges. Standard practice is for the cut edges to be treated with a heat gun, after which a quick dry red paint is applied. The performance of the belting will not be affected by the omission of the painted edges, which are mainly for cosmetic purposes, though the paint does act as a barrier to moisture.
Sold by the linear metre, orders for multiples will be supplied in a single open length.
We can join this belting for you using a vulcanising technique to form an endless belt, see the vulcanised joint section for details.

Product Code FB2.5inch3ply
Quantity in stock 329 item(s) available
Weight 0.40 kgs
Price: £7.25 including VAT £1.21

Rate this product

Product rating: *